Reversing The Door - Baumatic BW18BL Instruction Manual

Climate classification Appropriate ambient temperature
SN
N
ST
T
o Positioning the appliance requires two people in order to avoid
injuries or damage to the appliance.
o Your appliance should not be located in direct sunlight or
exposed to continuous heat or extremes of temperature (e.g.
next to a radiator or boiler). If this is not feasible, then you
should install an insulation plate between the appliance and the
adjacent heat source.
o You should check whether there is an electrical socket available,
which will be accessible after your appliance is installed.
o Place the appliance flatly and firmly on a solid base. The
appliance is fitted with adjustable feet on the front side, which
can be used to level the appliance.
o Anything positioned above the appliance must be at least 100
mm away to allow sufficient cooling of the condenser. You must
also allow a 100 mm gap to the rear and a 50 mm gap either
side of the appliance.
o Be sure to leave enough space for the opening of the door, to
avoid damage to the appliance or personal injury.
o IMPORTANT: The vent at the base of the appliance is for
ventilation. Nothing should be placed in front of this vent;
otherwise your beverage centre may not operate properly.

Reversing the door

(This option is only available from serial number: 10300001)
The beverage centre door is able to open from the left or right side.
The door is originally manufactured to open from the left side however
you can change this to the right side by following the instructions
below.
IMPORTANT: Before reversing the door, the appliance must be
disconnected from the power supply. All parts removed must
be saved to reinstall the door.
+10 to +32 degrees centigrade
+16 to +32 degrees centigrade
+18 to +38 degrees centigrade
+18 to +43 degrees centigrade
17