Table of Contents
Advertisement
Quick Links
GeoRecord
FCD-01 High Quality Car Video Recording System
Features
Build-in Global Positioning System (GPS).
Power on auto-record.
Build-in rechargeable Li-ion battery.
Automatically mark event files.
High speed SD card writing, lowest frame losing between two record files.
Special record file format, the recorded file will never lose.
Support up to 32GB SD card.
Manual event record function.
Cycling record.
Automatically records GPS data.
3D accelerometer for sensing hit and direction.
Automatic image enhancing for low brightness saturation.
Automatic adjust white balance in micro seconds.
Build-in high sensitivity microphone.
Extension capability for external active GPS antenna.
The recorded video watching software can link to the internet online map.
Advertisement
Table of Contents
Summary of Contents for GeoRecord FCD-01
- Page 1 GeoRecord FCD-01 High Quality Car Video Recording System Features Build-in Global Positioning System (GPS). Power on auto-record. Build-in rechargeable Li-ion battery. Automatically mark event files. High speed SD card writing, lowest frame losing between two record files. Special record file format, the recorded file will never lose.
-
Page 2: Mechanical Description
˙Car charger (DC 24V / 12V input, DV 5V output) CD ※SD card notes： 1. The FCD-01 uses smart file management system and cycling record technique. The system distributes the storage size for both event files (evt file) and normal record files (rec file) automatically. It can use the storage space of a SD card till almost 100%. -
Page 3: Hardware Description
Hardware description 1. Power switch： This DVR system has build-in a rechargeable Li-ion battery. On condition that the battery is not empty, this DVR system operates regularly when the user turns on the power. 2. Play： When the user presses the ‘Play’ key, during the Video-Out mode, system will play the last record section and send video out through AV-Out. -
Page 4: Operating Description
Operating description This DVR system has three operating mode, Recording mode, Viewing mode and Playing mode. The operating and switching between different modes is described below. 1. Record Power on The GPS position fix indicator and recording indicator blinks after power on. Once the GPS completes positioning, the GPS positioning indicator stop blinking and becomes always on. - Page 5 3. Playing the recorded video via “Track Player” Please install the “ Track Player” before playing the recorded video on a personal computer(PC). This software provides not only playing recorded video but also display electrical map tracking technology. By the electrical map tracking technology users can view the recorded video and the synchronized driving route at the same time.
- Page 6 Description operating windows The operating screen of “Track Player” was shown above. There are ten areas for different functions. A. Video display：Display the recorded video. B. Electrical map：Display the map, driving route. C. Driving information：Provides the longitude and latitude information and driving speed D.
- Page 7 Steps for files opening. Eject the SD card from the DVR system, and install to the SD card reader of the PC. Please make sure that the PC had been installed on the PC. Execute “Track Player”. Select language. Press the “Folder” icon and set the folder path to the SD card. Selecting the target files that need to be played.
- Page 8 Description of playing recorded files The above figure is a screen shot of video playing. Following are the description of labels on the figure. ”Play/Pause” key：Press ” ”button for video playing, and ” ” button to pause the video. Fast-forward tuning bar：Users can adjust the scroll bar for fast video searching. Volume control bar：For adjusting the volume of current video.
- Page 9 4. System parameters configuration There are three types of parameters can be configured to this system. Users can setup up the time-zone, recording quality and G-force sensitivity. The figure shown above shows the steps to load the configuration file. Step 1. Press the “Configuration” button to open the path selecting window of configuration file.
- Page 10 5. SD Card (1) The FCD-01 uses smart file management system and cycling record technique. The system distributes the storage size for both event files (evt file) and normal record files (rec file) automatically. It can use the storage space of a SD card till almost 100%. This system keeps at least 25% of total storage space for the event files to ensure the event record file will not be covered soon.
-
Page 11: Hardware Setting
7. Hardware setting SD card installation When installing the SD card, please follow the direction shown in the above figure. Push the SD card and the card holder will eject and release the SD card. Connecting car DVR system to a monitor. Before playing videos on the monitor, users need to connect DVR system to a monitor via an AV cable. - Page 12 Car charger When the low power indicator is on, please connect DVR system to the igniter via the specified car charger. External GPS antenna The signal from satellites is weak and disturbed easily by the buildings, terrain and the heat-insulating cardboard of a car. An external GPS antenna is a plus for DVR to receiving better GPS signal.
- Page 13 Mount installation The mount included a screw in one side and a suction cup in the other side. Tighten the screw to the DVR and then attach mount to the front windshield and lock the mount lever. 8. Charging： This Car DVR system has build in a rechargeable Li-ion battery. Please charge the battery with the specified car charger.
-
Page 14: Specification
Specification GeoRecord FCD-01 Car Video Recording System Model name Recording High Quality 30fps Video Recording 640x480 pixels with Audio Lens Field of View: Diagonal (110 ) Horizontal(97 High sensitivity GPS system integrated Position data log with recorded Video 3-Axis sensor...
Need help?
Do you have a question about the FCD-01 and is the answer not in the manual?
Questions and answers