These resources provide important setup information and are designed to help you get the most from your device. If you regularly carry out a sporting activity or wish to step up your training, the MIXpro heart rate monitor is the perfect choice for you. An option would be to use several accesso- ries like the MAXrun, an accelerometer sensor that will be attached under your shoe layers, or the MACRO X bike sensors that can be mounted on the fork or frame of any bike.
1 IN THE BOX Countdowns 1 & 2 and repeat function _18 2 GETTING STARTED 7 HISTORY MODE Buttons Viewing Workout History Icons Deleting Workout History Turn on the MIXpro Managing Memory Backlight Navigations 8 PC SAS SOFTWARE Time Software Downloading Date...
1 IN THE BOX 1x MIXpro Multi watch 1x HEART2feel X Heart rate monitor belt For more information about Optional Compatible Accessories go to www.o-synce.com MAXrun Foot pod sensor for running and walking MACRO2SXspe Speed sensor for biking MACRO2SXcad Cadence sensor for biking MAXpc USB transceiver for PC-Download of the training data (store &...
2 GETTING STARTED BUTTONS (meaning is written on the backplate of the watch) Button A (right): START/STOP/+ Stop watch > Start and Stopp press to increase value for settings press to customize settings press & hold Button B (front): VIEW/LIGHT to scroll through data pages in Sport or History mode press...
TURN ON YOUR MIXpro Press and hold C to turn on your MIXpro because the watch from factory is on stand by mode to conserve the battery. For more information see BATTERY. BACKLIGHT Press and hold B to turn on the backlight for 5 seconds. Extend the backlight for 5 more seconds by pressing any button.
TO PAIR SENSORS WITH THE WATCH: Move away (10 m) from other sensors while the MIXpro is trying to pair with your sensor for the first time. Bring your sensor within range (3 m) of the MIXpro. Press C until the SPORT...
SWITCH ON THE SENSORS After 30 minutes of inactivity the sensors are on standby and ready to send data. As soon as you install the sensors and start moving, the sensors send data to the watch (after pairing!). If you use the MACROX sensor on the bike, turn the wheel and crankset where the magnet is mounted.
Page 10
> PAIR (Sensor-pairing): PUSH blinks. Press A or D to activate the search for the (switched on) sensor. While the MIXpro scans for new sensors, the sensor icons blink. The icons are solid on the display when paired.The watch will exit automatically to the Stop watch mode when all active sensors have been found.
Page 12
Flashing values can be changed with A(+) or D(-) L mm Press and hold for 5 sec. Automatic 01,000 0PUSH0 CALIB CALIB Distance for Laps 01,000 0:00. LAP/KM 0OFF0 ZONES 00:00. Foot pod ACTUAL Speed zone 0OFF0 0OFF0 CALIB TONE SAVED (1Sek) 015,00...
3 Wrap the strap around your chest and attach it to the other side of the heart rate monitor. NOTE: The o-synce logo should be right-side up. 4 Bring the MIXpro within range (3 m) of the heart ratemonitor. 5 Press C to access SPORT mode. The heart rate icon appears on the SPORT page.
NOTE: Stay 10 m away from other ANT sensors while pairing. Bring the MIXpro within range (3 m) of the heart rate monitor while pairing. If the problem persists, replace the battery.
5 SPORT-MODE The SPORT-Mode offers several options: _ Stop watch with 99 laps _ Speed, distance and cadence for biking or running _ Heart frequency _ Personal settings _ Data recording _ Recording max. 7 hours If you don’t use any sensor, only the stop watch is working. Any sensor which is paired will be shown permanently as symbol on the display.
Page 16
SPORT 00´00´´ START/ 00:00. Stop w/o lap Stop with lap Lap 1 00´00´´ LAP1/ 00:00. Lap ‘98 00´00´´ LAP98/ 00:00. Lap ‘99 STOP 00´00´´ 00´00´´ STOP/ STOP/ 00:00 00:00. Save data Don’t save data SAVE SAVE SAVED 00´00´´ DATA 00:00.
SPORT Upper Display 00 00 00´00´´ 00 00 START/ DIST/ SPEED/ 00:00. 00:00. 00:00. 00:00. 00´00´´ 00´00´´ SPLIT/ LAP/ CAD/ 00:00. 00:00. 00:00. Shown only by taken laps Lower Display 00´00´´ 00´00´´ 00´00´´ 00´00´´ DIST/ SPEED/ CAD/ 00´00´´ 00´00´´ 00´00´´ 00´00´´...
Page 18
When finished, press B to advance to the REPEAT setting Press D (+) and A (-) to turn on or off the repeat function. Press B to advance to TIMER 2 settings. Press D (+) and A (-) to turn on or off the TIMER 2 function. Repeat the steps from TIMER1 to set TIMER 2.
Page 19
Then do minuts and seconds in the same way. See the diagram below. Switch on the repeat countdowns of one or both TIMERS – infinite loop REPEAT: OFF (blinks): Press D, to switch ON. Confirm with B Activate Countdown TIMER 2: OFF (blinks): Press D, to switch ON. Confirm with B Set the starting values of TIMER 2 (only if TIMER 2: ON): Hours, minuts, seconds: analog like TIMER 1, see the diagram below: TIMER...
7 HISTORY MODE The MIXpro holds up to 100 laps and up to seven hours of exercise files and stores workout data based on the type of workout, the accessories used, and your training settings. Press C until the DATA mode appears.
12 months for the watch, 200 hours for the MAXrun, 18 months for the heart2feel belt and the MACRO 2S sensors (typical use). When the battery is low, the LoBATT warning blinks on the MIXpro screen in Time mode. CAUTION: Replacing the battery resets the MIXpro software and restores the factory...
(such as in the trunk of a car), as permanent damage may result. WATER RESISTANCE The MIXpro is water resistance to 30 meter (3ATM). The heart2feel belt is water resistance to 10 meter (1ATM) – don’t use it for swimming.
This information disclosed herein is the exclusive property of o-synce Europe GmbH and is not to be disclosed without the written consent of o-synce Europe GmbH. No part of this pu- blication may be reproduced or transmitted in any form or by any means including electronic storage, reproduction, execution or transmission without the prior written consent of o-synce Europe GmbH.