Summary of Contents for Pacvac Polypro 400
- Page 1 Commercial Suction Polisher Support: 08 9479 1444 Please read information manual carefully. Retain for future reference. www.pacvac.com...
- Page 2 5. Pacvac shall not in any event be liable for any consequent or contingent loss or damage whatsoever. 6. Labour on any warranty will be covered within the first 12 months. Labour costs on claims after 12 months will be the purchaser’s responsibility.
-
Page 3: Table Of Contents
Operation Instructions............Page 3 Maintenance Instructions............Page 4 Important Do’s and Dont’s............. Page 5 Technical Specification............Page 5 Polypro 400 Parts Profile............Page 6 Polypro 400 Parts Profile (Cont’d).......... Page 7 Polypro 400 Parts Profile (Cont’d).......... Page 8 Notes................... Page 9... -
Page 4: Important Safety Instructions
12. Do not use the machine to pick up flammable or combustible liquids, such as petrol etc., and NOTE: Polypro 400 to be used by trained do not use in areas where they may be present. persons ONLY. Training DVD available by 13. -
Page 5: Operation Instructions
DOWN Step 5: • To switch ON the vacuum motor simply depress the vacuum motor switch conveniently located on the left hand side of the handle face plate (from operator position) when machine is running. www.pacvac.com Support: 08 9479 1444... -
Page 6: Maintenance Instructions
3. maintenance Instructions Step 1: • Detach dome lid and remove dust bag from MOTOR DUS T F ILT E R B A G machine. Push dust bag inside out over bin, then brush or vacuum bag. • Do not hit bag against the wall and do not wash bag. -
Page 7: Important Do's And Dont's
• ENSuRE SLOTS IN SKIRT aRE OPEN aND fREE Of DEbRIS. • CHECK THaT VaCuum mOTOR OuTLET aND INLET PORTS aRE CLEaR Of ObSTRuCTION. • DO NOT uSE ExTENSION LEaDS WITH THE POLYPRO 400 uNLESS YOu HaVE CONSuLTED PaCVaC OR YOuR PaCVaC DISTRIbuTOR. 5. Technical Specifications... -
Page 8: Polypro 400 Parts Profile
6. Polypro 400 Parts Profile No. Part Name Part No. 1. Top cover cowl FM845 2. Drive motor FM843 3. Drive key 4. Drive pulley FM846 5. 6x8 Knurled grubscrew 6. Washer FM856 7. Bearing FM857 8. Circlip FM858-2 9. Spacer FM859 10. -
Page 9: Polypro 400 Parts Profile (Cont'd)
6. Polypro 400 Parts Profile (Cont’d) No. Part Name Part No. 37. Top dome lid KC251 38. Dust bag UP202 39. Canister filter PV522 40. Main vacuum canister KC252 41. Motor gasket KC253 42. 1000w Motor flow thru UP118 (240v) 43. -
Page 10: Polypro 400 Parts Profile (Cont'd)
6. Polypro 400 Parts Profile (Cont’d) No. Part Name Part No. 57. Handle grip FM408-2 58. Connection Box PV260 59. Cable grommet FM406L 60. Switch (vacuum) UP215 61. Mains cable lead UP110 62. Cord restraint UP223 63. Main bar FM411 64. -
Page 11: Notes
7. Notes www.pacvac.com Support: 08 9479 1444... - Page 12 Service & Help Contact the place of purchase or a Pacvac distributor or service agent. For details of your nearest Pacvac distributor/service agent contact Pacvac on 08 9479 1444 Revised: Jan 2008 Support: 08 9479 1444 Please read information manual carefully.
Need help?
Do you have a question about the Polypro 400 and is the answer not in the manual?
Questions and answers