Honda 2007 CR-V Owner's Manual page 304

Main Menu
Table of Contents
Changing a Flat Tire
5. Take the jack out of the spare tire
area.
Turn the jack's end bracket
counterclockwise to loosen it, then
remove the jack by lifting it
straight up.
6. Unscrew the wing bolt and take
the spare tire out of its well.
300
JACK
7. Loosen each wheel nut 1/2 turn
with the wheel nut wrench.
WHEEL NUT WRENCH
JACKING POINT
8. Place the jack under the jacking
point nearest the tire you need to
change. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch.