Summary of Contents for Powerlink PL-3000 SERIES
- Page 1 FEATURES AND OPERATIONS TWO WAY COMMUNICATION REMOTE STARTER & SECURITY SYSTEM OWNER'S MANUEL...
-
Page 2: Transmitter Operations
TRANSMITTER OPERATIONS ONE WAY TRANSMITTERS FOR TWO WAY TRANSMITTER FOR TWO WAY LCD TRANSMITTER FOR PL-3000 & PL-7000 SERIES PL-3000 SERIES PL-7000 SERIES COMMON BUTTON USED BY 3 TYPES OF TRANSMITTERS ARM & LOCK THE DOORS DISARM & UNLOCK THE DOORS... - Page 3 TRANSMITTER OPERATIONS TRANSMITTER FOR PL-3000 SERIES AUX: TRUNK OPENER SLIDE DOOR OPEN 2 sec: SELECT 1 OR 2 VEHICLE AT THE SAME TIME BATTERY SAVER: SELECT PAGING ON/OFF AT THE SAME TIME LCD TRANSMITTER FOR PL-7000 SERIES STATUS REPORT STATUS REPORT...
- Page 4 TWO WAY LCD TRANSMITTER OPERATIONS (Option) Adjust real time clock Keep pressing "F" button until appear then release. The display will show the hour numbers flashing. Use " " button to select the hour, minutes or Am/Pm. Then use the " "...
- Page 5 TWO WAY LCD TRANSMITTER OPERATIONS Adjust start timer Keep pressing "F" button until appear then release. The display will show the hour numbers flashing. Use " " button to select the hour, minutes or Am/Pm. Then use the " " button to increase or the " "...
- Page 6 TWO WAY LCD TRANSMITTER OPERATIONS Change SOUND / VIBRATION mode Keep pressing "S" button until appear then release. Then use the " " button or the " " button to toggle between SOUND or VIBRATION option. The corresponding "Audible" or "Vibration" icon will be display.
- Page 7 TRANSMITTER OPERATIONS REMOTE AUDIBLE FUNCTION BUTTON PRESSING ACTIVATION FEEDBACK BUTTON ARM: Press once 1 Hi/Lo beep System armed and doors ARMING NO CHIRP ¦ Arm & lock ON locked without chirp ARMING WITH CHIRP Press twice 1 Hi/Lo beep System armed and doors ¦...
- Page 8 Press twice while system 4 Hi/Lo beeps System keep disarm until TEMPORARY VALET MODE disarm pressing BUTTON " "AUXILIARY (for PL-3000 series transmitter): TRUNK OPEN Press once 3 Hi/Lo beeps Trunk opened SLIDE DOOR OPENED Press twice 3 Hi/Lo beeps...
- Page 9 TRANSMITTER OPERATIONS PAGING SIGNALS TO TRANSMITTER: 1 Hi/Lo beep Automatic arming or security rearm engaged 3 Long beeps Engine stops running via remote or engine running time has expired Alarm has been triggered while you were away 5 Hi/Lo beeps Alarm in progress 15 Long beeps Engine running via remote and doors locked...
-
Page 10: Features And Operations
FEATURES AND OPERATIONS ARMING: Arming the system will also enable the starter kill and lock the doors, if installed. You can select silent or audible arming by programming option #3. If you try to arm the system and you hear 3, 4 or 5 beeps, one of the protected zones is opened. The system will ignore the defective zone and force the system to arm. - Page 11 FEATURES AND OPERATIONS PANIC MODE: With engine not running, keep pressing button for 2 seconds: panic mode is engaged. The horn or siren will be triggered. To stop the panic mode simply press button. VALET MODE: To disarm the system in case of transmitter loss or for vehicle servicing, you must perform the sequence twice to enable the valet mode.
- Page 12 FEATURES AND OPERATIONS IGNITION LOCK: Doors locks automatically when ignition is ON and brake pedal is depressed. Doors will unlock when ignition is turned OFF (ask your dealer for this feature). SHOCK SENSOR PRE-WARNING: Siren/Horn chirps rapidly when shock sensor is triggered. If shock sensor is triggered for a second time within 10 seconds, the siren/horn sounds for 30, 60 or 120 seconds (depending on the programming).
- Page 13 FEATURES AND OPERATIONS KEYLESS RUNNING MODE: FOR AUTOMATIC TRANSMISSION: 1. You are seated in the vehicle, engine running with the ignition key, make sure the hood is closed and that the toggle valet switch is in the OFF position and that the doors and windows are closed. 1.
-
Page 14: Limited Warranty
LIMITED WARRANTY The manufacturer guarantees to the purchaser of origin the remote starter and alarm to be free of defect material and labour. However, if it is proven that the product is defective, inside the two year period as from the original date of purchase, the manufacturer will repair or replace, without expenses towards the purchaser, any part (excluding any expenses incurred to deliver the product to the manufacturer) remote starter or alarm which the manufacturer considers defective.