Sanyo DP32648 Service Manual page 7

POWER AND MAIN BOARD REMOVAL
Remove 5 screws (3X14) to take the main board off.
Remove 6 screws (3X14) to take the power unit off
1. Disconnect the lead wires from LCD panel, speakers, and control board.
2. Once you have taken off the Lid back, stand base, power unit and main board remove 9
screws (C:3X14) and 4 screws (D:4X8) to take the back cabinet off.
3. Lift the LCD panel from the front cabinet.
1: Main Board Removal
2: Power Unit Removal
LCD panel removal Removal
— 7 —