LTM-4100 Multiformat 4x1 Selective Switcher (Component, Y/C, Composite, Balanced Audio, RS422) Safety Precautions 1. To prevent fire or shock hazard, do not expose this equipment to the environment of Humidity and/or dust. Do not use this equipment in an unprotected outdoor installation or any area classified as a wet area.
Ten (10) LTM-4100 to be controlled by one PC. The LTM-4100 operates on 110/220 Volts with an automatic switching power supply, and will process NTSC, PAL, PAL-M, PAL-N and SECAM signals. It is housed in a 2RU cabinet.
XLR to RCA cable where the negative phase pin of the XLR is grounded. Should it required to add more audio distribution to the LTM-4100 it is advised that the LAIRD LTM-ADA6 be used to provide a equal quality bal- anced signal distribution capability.
WITCHER The diagrams below illustrate some typical examples of the LTM-4100 operating in switch mode. Diagram 1-A shows an editing system’s input being selected to any one of four VTRS. Diagram 1-B shows VTR’s input being selected to various pro- gram sources.
Page 7
LTM-4100 Multiformat 4x1 Selective Switcher (Component, Y/C, Composite, Balanced Audio, RS422) LTM-4100 I TANDARD The diagrams below illustrate some typical examples of the LTM-4100 operating in standard switching mode. Diagram 1-C VHS Hi-Fi CH 3 1:15 POWER VHS Hi-Fi VHS Hi-Fi...
Page 8
LTM-4100 Multiformat 4x1 Selective Switcher (Component, Y/C, Composite, Balanced Audio, RS422) Component Video (R-Y, B-Y) (YUV) Switches Y/C Video Output Composite Video Output YC Video Switches RS422 Machine Control Composite Video Switches RS422 Machine Control I/O Balanced Audio Switches RS232 Computer Control Serial Input...