Advertisement
2) Connect the smartwatch with your smartphone by Bluetooth.
Settings on your smartphone → Click Bluetooth → Find Bluetooth ID "U8"
in Bluetooth device list → Pair the smartphone with Bluetooth ID "U8"
The smart phone will receive a "Bluetooth pairing request" and then press
"confirm" for pairing.
After pairing the VIBIAN XWATCH10 it will prompt "**Connected".
This indicates that a successful connection has been established
between your smartphone and the VIBIAN XWATCH10 model U8
smartwatch. There will be a standby interface "
" icon indicating that a
successful connection has been made with your smartphone. After a
successful connection, you can follow the operation according to below
steps.
3) Install the APK and set up the accessibility settings in the APK
software. Activate the notification service in your accessibility settings of
Android allowing the smartwatch to show notifications of applications.
4) Below is the introduction of all the function keys, please refer to
the picture at page 1 of this manual.
A. Key for: Power on / Power off / Home
Long press this button for power on / off,
Short Press this button to return to the standby interface / Home menu.
B. Key for Back / Hang Up
Click the key to go back to the previous menu or hang up when calling
C. Key for Volume
Click the key to pop-up the volume adjustment interface
D. Key for Confirm / Answer
In standby interface click to enter the main menu, confirm key in the main
menu, answer key when calling.
E. Microphone
Please do not cover this hole while you are calling otherwise people can
not hear you.
F. Micro USB port
4
Advertisement
