Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for parkfun targa 38
Summary of Contents for parkfun targa 38
-
Page 1: Instruction Manual
INSTRUCTION MANUAL ELECTRIC POWERED HIGH SPEED RACING YACHT WARNING This model is not toy. Adult supervision is required. Read the instructions before any use. Never touch the moving parts. Modifi cations, errors and printing errors reserved PF-301-**-**... -
Page 2: Read This First
LIABILITY EXCLUSION / COMPENSATION As manufacturers, we at PARKFUN are not in a position to infl uence the way you build and set up the model, nor how you install, operate and maintain the radio control system components. For this reason we are obliged to deny all liability for loss, damage or costs which are incurred due to the incompetent or incorrect use and operation of our products, or which are connected with such operation in any way. -
Page 3: Spare Parts
• Never charge the battery while it is still inside the model Because of the high energy density of these cells, they must be used with extreme precautions PARKFUN denies any responsibility claims or damages caused by use or misuse of these batteries. SPARE PARTS... - Page 4 BOX CONTENT PF-301-**-** 1 Electric powered high speed racing yacht Completely factory assembled with all electronics installed. Electronics accessories 1 Professional 2-Channel FM transmitter 1 Ni-Cd battery 7,2V - 1900mAh 1 Mains charger...
-
Page 5: Technical Specifications
TECHNICAL SPECIFICATIONS: Length: 703mm Widht 193mm E-motor: 600 type 2CH/1 servo Power: Ni-Cd battery pack 7,2V - 1900 mAh Required for operation: 8 dry cells batteries (LR-6 type) TRANSMITTER: Antenna Carrying bar LED indicator Throttle trim Throttle stick Servo reverse switches POWER ON / OFF switch Rudder trim... -
Page 6: Transmitter Battery
TRANSMITTER BATTERY • Install 8 pcs dry cells LR-6 (not included) in the bat- tery box of the transmitter. ELECTRONIC COMPONENTS MOTOR 600 TYPE SERVO SPEEDCONTROLLER RECEIVER Respect the polarity Brown or Black Wire = - negatif Red Wire = + positif Orange or Yellow Wire = Signal Electronics equipment is installed at the factory. - Page 7 STEP 1 • Connect the charger to the mains and connect the pow- erpack to the charger. • After 4 hours, disconnect the powerpack from the charger and unplug the charger. STEP 2 • Turn on the transmitter. • Install the powerpack in the boat and connect it with the speedcontroller.
-
Page 8: Safety Precautions
SAFETY PRECAUTIONS • This model is not suitable for children under 14 years of age. • This is a high speed model, which means that you must never operate it when there are persons or animals in the water, otherwise there is a serious risk of causing injury. •... -
Page 9: Checking The Controls
STICK OPERATION ACTION MOVEMENT POWER POWER CHECKING THE CONTROLS POWER Check if the controls move as indicated on the drawing. Correct the movement direction if necessary with the reverse switches on the bottom of the transmitter. TRIMS ADJUSTMENT POWER To make small adjustments to compensate for unwanted infl uences or imperfections in the control system, you can use the trim levers next to and underneath the control sticks. - Page 10 Declaration of conformity EC-R&TTE Product: TARGA 38 boat with 2CH radio transmitter Intended Purpose: Radio equipment for remote controlling of models On request Equipment class: Complies with the essential requirements of chapter 3 and the other relevant provisions of the FTEG (Article 3 of the R&TTE directive), when used for its intended purpose...
- Page 11 RADIO CONTROL FREQUENCIES ADMITTED IN FOLLOWING COUNTRIES BANDS Channel Frequencies 35 MHz-Band 35.010 • • • • • • • • • • • • • 35.020 • • • • • • • • • • • • • 35.030 •...
- Page 12 www.parkfun-rc.com...
Need help?
Do you have a question about the targa 38 and is the answer not in the manual?
Questions and answers