DSP VHF/UHF FM transceiver User Manual

First Thing... charge your battery. Unlike some brands, Baofeng does not pre-charge the battery.
Programming Software... http://wouxun.us/Software/Baofeng/UV-5R Setup Files.zip
UV-5R Yahoo User-Group... http://groups.yahoo.com/group/baofeng_uv5r
Programming Manually... This is not covered in the owners manual, here's how.
To program repeater 146.985, minus offset, 100 Hz tone, low power level, into Channel #010
Turn on radio.
If in Memory Mode switch to VFO Mode (VFO/MR)
Select 5 KHz Step - (MENU + 1 + MENU) (Use the
Enter
Press [MENU] + 2 + [MENU]
Press [MENU] + [EXIT]
Press [MENU] + 5 + [MENU]
Press [MENU] + [EXIT]
Press [MENU] + 1 + 3 + [MENU]
Press [MENU] + [EXIT]
Press [MENU] + 2 + 7 + [MENU]
Press [MENU] + [EXIT]
Enter
Press [MENU] + 2 + 7 +
[MENU] + [MENU] + [EXIT]
UV-5R.com
146.985
Use the
Use the
Radio prompts that REC FREQ has been stored
146.385
Radio prompts that TX FREQ has been stored
Return to Memory Mode (VFO/MR)
key for 5K) (MENU + EXIT)
The receive frequency
key to select Low Power
To accept and exit
key to select Wide Bandwidth
To accept and exit
Use the key to select 100 Hz Tone
To accept and exit
Enter 010 or Use the
This stores the Receive Frequency
The transmit frequency
key to select 010