Advertisement
Advertisement
Summary of Contents for noblerex k2 mh-7500
- Page 1 PRODUCT INSTRUCTION MANUAL Model No: MH - 7500...
-
Page 2: Table Of Contents
NOBLEREX K2 MANUAL Page 2 Table of Contents Warnings and Safety Installation and Assembly Preparing for Operation Preparing to Use the Noblerex K2 Operating the Noblerex K2 Exercise Programs Troubleshooting/Warranty Information... -
Page 3: Warnings And Safety
AESTHETICMD Page 3 Warnings and Safety For your protection, please read these safety instructions completely before operating the NobleRexK1 and keep this manual for future reference. Carefully observe all warnings, precautions and instructions on the K1 machine, or those described in the instruction manual and adhere to them. -
Page 4: Installation And Assembly
NOBLEREX K2 MANUAL Page 4 Installation & Assembly The Noblerex K2 consists of a main body, floorboard, stand handle, remote control, and part set (3 bolts and 1 hexagonal wrench). Check contents before installation. (1) Use the bolts and tool of... -
Page 5: Preparing For Operation
(4) Stand Handle: The handle extending from the floor board to the hand grips. This may be used to support your balance while operating the Noblerex K2. There is a diagram located between the grips at the top of the handle which displays body positions for exercises mentioned in chapter 5 of this manual. - Page 6 NOBLEREX K2 MANUAL Page 6 (1) This switch converts the NobleRexK1 into ‘manual’ mode while the machine is operating in ‘auto’ mode. (2) The speed indicator green LED, displays the current speed and vibration intensity of the program. Speed is measured from left to right on a scale of 1 to 10, 1 being the slowest (least intense), 10 being the fastest (most intense).
- Page 7 AESTHETICMD Page 7 (1) The NobleRexK1 is powered by pressing this button once. The power is shut off by pressing the button again. (2) Auto mode 1 is the first button from left to right. This mode provides a maximum speed or intensity that fluctuates between 1 and 5.
-
Page 8: Preparing To Use The Noblerexk2
NOBLEREX K2 MANUAL Page 8 Preparing to Use the NobleRexK2 The NobleRexK1 has two modes of control, AUTO and MANUAL which can be adjusted at any time during operation. Manual control: This mode lets the user choose a combination between vibration intensity and operation time. - Page 9 AESTHETICMD Page 9...
-
Page 10: Operating The Noblerex K2
NOBLEREX K2 MANUAL Page 10 Operating the Noblerex K2 Note: If the power light is off and there is no sound, check to make sure the machine is plugged into an outlet. Note: When LED illuminates on both sides of... - Page 11 AESTHETICMD Page 11 The default operation mode is auto mode-1 or beginner mode, the NobleRexK1 ‘beeps’ once when this is selected. If you choose to select a different mode you may do so at this point. To select auto mode- 2 or auto mode- 3, press the corresponding auto mode button on the remote control or operation board display.
-
Page 12: Exercise Programs
NOBLEREX K2 MANUAL Page 12 Exercise Programs Please use these exercise programs as a guide, however feel free to experiment and consult with your doctor to help achieve your desired results. You can sit, lie, or position a part of the body upon the vibration platform and adjust the application intensity to create a different effect. - Page 13 AESTHETICMD Page 13 Exercise Position #3 Step on the vibration plate comfortably and use both hands to hold the handle. Spread the legs as much as possible and pull the hip backwards and bend the waist. At this time, straighten both hands and look toward the front. It is effective for lower leg muscles, and it prepares the leg muscles for walking or running activities.
- Page 14 NOBLEREX K2 MANUAL Page 14 Exercise Position #7 Straighten both hands and place them on the vibration plate. Spread both legs and lift the heels of the feet to take the push up position. Muscles stimulated: Strengthening of upper body muscle, including...
-
Page 15: Troubleshooting/Warranty Information
The K2 will equipment does not operate. not operate until the power button is engaged. None of the LED lights are on The Noblerex K2 is when the power cord is malfunctioning. Discontinue plugged into an outlet. use and contact AestheticMD... - Page 16 For questions, comments, or ordering information (602) 485-3621 Fax (602) 996-2743 www.aestheticmd.com 4809 E. Presidio Rd. Scottsdale, AZ 85254 info@aestheticmd.com AestheticMD Medical Clinic 8591 E. Bell Rd., Suite 102 Scottsdale, AZ 85262 info@astheticmd.com AestheticMD ©2006 All rights reserved...