Warning Messages; Gate Position; Magazine Footage Adjustment - AAton Penelope User Manual

Warning messages

Penelope LCD screens display a warning when a crucial parameter has a
problem.
Gate position (Gate)
The camera gate is removable for an easy 2 to 3 Perf format switching. The
correct positionning of the gate is mandatory for proper camera functioning
and focused pictures. The camera gate holder is equipped with 4 sensors to
check the gate position. If it is not properly positioned, the camera displays the
message «GATE MISPLACED» and refuses to start. Remove the gate and
reinstall it.
Magazine upper lock lever
The magazine top locking lever, located on top of the camera body, insures
the magazine's proper positioning. It is equipped with a position sensor which
does not allow the camera to start if this lever is unlocked. If it is , the message
«MAG NOT LOCKED» is displayed. Lock the lever and start the camera.

Magazine footage adjustment

Press the «Set» key, then the «Mag» key to access the MAG menu. If a full
400ft roll has been loaded, adjust the footage to 400ft (122m) by pressing the
«up» or «down» key. If you load a short end in the amgazine, check the length
with the magazine footage counter and enter the same value into the MAG
menu (assistant or cameraman screen and keys can be used).
Aaton Getting started
19