Pro-Ject Audio Systems CD Box S Instructions For Use

Hide thumbs Also See for CD Box S:

Table of Contents

Download this manual

INSTRUCTIONS FOR USE

Pro-Ject CD Box S

Table of Contents

Need help?

Do you have a question about the CD Box S and is the answer not in the manual?

Page 1 INSTRUCTIONS FOR USE Pro-Ject CD Box S...
Page 2: Mains Power Connection
Connectors Pro-Ject Audio Systems, Vienna, Austria Make all connections whilst the CD player is disconnected from the power supply. Take care to connect the left and right channels correctly. The right channel is usually marked red, the left channel black or white.
Page 3: Remote Control
Remote control To switch on from standby or to standby ON/OFF STOP ON/OFF turns the unit on or back into standby Volume control VOL- VOL+ adjust the sound volume of your Pro-Ject Audio amplifier Stop STOP stops playback Play / Pause starts and pauses playback Selecting tracks accesses a specific track directly and start playback.
Page 4: Front Panel Controls
Front panel controls CD Box S To switch on from standby or to standby A short press of the push button on the left hand side switches the player to its fully operational status. To return to standby, press the button for more than four seconds. The display shows STANDBY when the unit is in standby.
Page 5: Replacing Batteries
Battery type: 1 x CR2032 / 3V or 1 x CR2025 / 3V Do not dispose the batteries as ordinary domestic refuse. Please dispose your exhausted batteries at the appropriate collection sites - usually located at supermarkets and drugstores. Technical specifications Pro-Ject CD Box S Supports: CD, CD-R, CD-RW and Hybrid-SACD...