Subscribe to Our Youtube Channel
Summary of Contents for Shideantec SD-880RC16-DC1001
- Page 1 SD-880RC16-DC1001 Manual VER A0 CATALOGUE Precautions Parts in the package Names of each part and functions Operation instructions Installation instructions Specification Wiring How to correct the usual faults...
- Page 2 Please read this manual carefully before installation and operation to avoid any damage and loss. CAUTION WARNING (1)Keep the surface clean. Do not wash it with (1)Only professional engineer is qualified for water directly. Do not wipe with chemical the wiring work. solvent like thinner, benzene and petrol.
- Page 3 Outdoor station SD-880DC1001 Camera Super Bright LEDs Pick up the image of Let you see the visitor clearly. clearly even at night. Speaker Broadcast the 4P LINES voice from the host Microphone Terminals function: Call button Pick up the voice Chime "ding dong"...
-
Page 4: Call Button
1.Handset .Call Button Lift to communicate with your visitors. Press this button to realize the inter 2.Monitor Screen -communication when two or more Color LCD-TFT indoor monitor are installed. 3.Power Lamp(Red) 8.Door Release Button Indicate if the system is on or off. 9.Volume 4.Operate Lamp(Red) 10.Brightness... - Page 5 Communicate with outdoor statione: Hang up the Pick up handset handset to end and press "Monitor" communication, button to communicate and monitor auto with visitor, and image off simultaneously. auto on simultaneously. Monitor Hang up the Press "Monitor" handset to switch button, picture off monitor, or from the camera...
- Page 6 1. Fasten the bracket onto the wall by screws 2. Connect the 4-cord to the terminals back of indoor monitor (W/ polarity) 3. Fasten the indoor monitor onto the bracket 4. Connect the spring wire of handset Put the plug into the power socket. Indoor monitor SD-880RC16 SD-880DC1001...
- Page 7 Brown (R1) VIDEO Black (R2) : GND White (R3) : AUDIO Red (R4) : VCC How to connect with electronic lock: L+,L- are terminals for connecting Electronic Lock. RVV 2X 32/0.2 W/1.0mm cut area wire for electronic lock connection (reference distance 25m) Electronic Lock Electronic Lock Electronic Lock...
- Page 8 No voice No picture 1. Check the power plug. 1. Check the spring wire of handset. 2. Check the contrast if over adjusted. 2. Pull out the plug and insert again. 3. Check the terminals if wiring is wrong . 3.
Need help?
Do you have a question about the SD-880RC16-DC1001 and is the answer not in the manual?
Questions and answers