Changing Or Re-Entering A Key; Evaluation Mode; Pyramix Software Registration; Checking Installed Options - Merging Pyramix Installation Manual

Import Key button and browse for your Key file called YourPersonalKeyXXXXX.mtk
3. Open the MT Security Settings Control Panel (as above), in the Registration section select the board number corresponding to
the serial number for your Keys or HASP Key for a dongle, click the Enter Key button and type your User Name, Company
Name and Key then click OK. Repeat this step for each Keys listed in the email.

Changing or re-entering a Key

Should you need to subsequently change or re-enter a Key, follow the appropriate option above.
The key system is "smart". Only one key or set of keys is required regardless of the number of boards in a system. Any card (or security
dongle) can hold this key set as the authorization is processed based on a "Logical OR" of all keys present on any and all Mykerinos boards
or dongle. Of course, this Logical OR will only process keys with identical User Name and Company Name to the one entered in the key
enabling window.

Evaluation Mode

If Pyramix is started without a valid registration key, the software will recognize that no valid key is available and will start in "evaluation"
mode, which only allows for basic operation.

Pyramix Software Registration

We strongly recommend you register your Pyramix software immediately to ensure access to the latest software downloads and support
at:

Checking Installed Options

At any time, you may check the software options enabled for your system from the MT Security Settings control panel: Start >
Control Panel > MT Security Settings
http://www.merging.com/register/
www.merging.com/Pyramix
1