Care & Maintenance - Perception kayak Owner's Manual

ROTOMOLDED KAYAK CARE
Our "roto" kayaks are made of high-density linear
polyethylene, which is virtually maintenance free. A
minimal amount of care in storage and transporting
will help the kayak maintain a like-new condition for
many years.
Polyethylene will become more flexible when in warm
conditions such as a hot, sunny day. It is possible for
a kayak strapped tightly to a roof rack to temporarily
deform at the weight bearing points. Use a padded
rigid bar sport rack in addition to a kayak J cradle or
saddles to disperse the weight.
CLEANING
Usually, a quick rinse of fresh water is all that is necessary
to keep your hull clean and functioning in good order.
This is very important after paddling in salt water,
especially if your boat is outfitted with a rudder system.
Be sure to thoroughly rinse the rudder, rudder cables,
and footbraces with fresh water to remove salt residue.
Superficial scratches may occur, but can be removed or
reduced by use of a marine boat polish designed for
polyethylene hulls. Sanding or use of an abrasive
rubbing compound is not recommended.
To keep your kayak shining and minimize the long-term
degradation caused by UV exposure, use an ultraviolet
protectant such as 303 Protectant. 303 can also be used
lightly on the top of the hatches and on the seat
outfitting and plastic buckles and straps, in addition to
the kayak itself. 303 is available at your local Perception
dealer or online at harmonygear.com.
WARNING:
Avoid dragging kayak across the ground to
prolong its life and maintain its look and
performance. Two people, utilizing the carrying
handles, is the best way to transport the boat.
Alternately, you can transport using a kayak cart,
or at harmonygear.com.
available at your dealer
care & maintenance
7