3.2 Power on.
Please verify the polarity of the power supply and connections before power on the unit.
After connect the power supply, there are different ways to power on the monitor:
1. Connect the VGA to any VGA source.
2. Connect the Rear camera input to a CVBS source.
3. Press the power on button
4. Adjusting
4.1 Keyboard.
1. Dimmer.
2. Decrease Volume/OSD Parameter .
3. Source switching.
4. Increase Volume/OSD Parameter .
5. Show OSD window.
6. Power on key.
7. Power on Indicator/LED.
until the monitor power on.
XF700 OPERATION MANUAL
Page 4