Acer X111 Series User Manual page 47

2D to 3D
(H6510BD)
3D Format
(P1340W/
H6510BD)
3D Sync Invert
3D Warning
Message
Downloaded From projector-manual.com Acer Manuals
•
2D to 3D: Converts 2D contents to 3D. Note that DLP 3D
glasses are required to obtain the best 3D effect.
•
Mode: Provides several preset 2D to 3D conversion
modes for your selection. You can also select User and
use the "Convergence" and "Depth" functions described
below to setup your customized conversion mode.
•
Convergence: Changes the convergence effect that is
used when converting 2D contents to 3D.
•
Depth: Adjusts the image depth of 3D objects.
"Depth" and "Convergence" are only available when
"Mode" is set to "User".
If the 3D content is not displayed correctly, you can select a
3D format that suits the 3D content you are viewing and
obtain the best result.
If you see a discrete or overlapping image while wearing DLP
3D glasses, you may need to execute "Invert" to get best
match of left/right image sequence to get the correct image
(for DLP 3D).
Choose "On" to display the 3D warning message.
Note: Supported 3D signal timings:
Signal source type
Video/S-Video/Component
video (for P1340W/H6510BD)
VGA/HDMI (PC mode)
HDMI (for P1340W/H6510BD)
It needs correct settings on graphics card 3D application program for correct
3D display.
Supported timing
HQFS 3D (480i@60Hz), 576i@50Hz
640 x 480@50/60/100/120Hz
800 x 600@50/60/100/120Hz
1024 x 768@50/60/100/120Hz
1280 x 800@50/60/100/120Hz
HQFS 3D (480i@60Hz) , 576i@50Hz,
Frame Packing (1080p@23.98/24Hz,
720p@50/60Hz)
Side-by-Side Horizontal (1080i@50/60Hz)
Top-and-Bottom (720p@50/60Hz,
1080p@23.97/24Hz)
37