2. Speaker Terminals; Fm 75 Ohms Aerial Socket; 5. Am Loop Aerial Socket - Sharp XL-HP404E Operation Manual

! Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS socket and position
the FM aerial wire in the direction where the strongest signal can be
received.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM LOOP socket. Position the
AM loop aerial for optimum reception. Place the AM loop aerial on a
shelf, etc., or attach it to a stand or a wall with screws (not supplied).
Note:
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better recep-
tion.
Installing the AM loop aerial:
< Assembling >
Downloaded From Disc-Player.com Sharp Manuals
! Speaker connection
Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
Caution:
" Use speakers with an impedance of 6 ohms or more, as lower im-
pedance speakers can damage the unit.
" Do not mistake the right and the left chan-
nels. The right speaker is the one on the right
side when you face the unit.
" Do not let the bare speaker wires touch
each other.
" Do not allow any objects to fall into or to be
placed in the bass reflex ducts.
" Do not stand or sit on the speakers. You may
be injured.
! Speaker grilles are removable
< Attaching to the wall >
Make sure nothing comes into contact
with the speaker diaphragms when you
remove the speaker grilles.
Wall Screws (not supplied)
03/10/20
Red Black
Incorrect
XL-HP404E(A)1.fm TINSEA009AWZZ
XL-HP404E
2
9