1. Manuals
  2. Brands
  3. iKON AVS Manuals
  4. Recording Equipment
  5. SYNERGY AU4
  6. User manual

iKON AVS SYNERGY AU4 User Manual

4 input to 1 output stereo audio router and volume control
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Enlarged version
SYNERGY AU4
The Synergy AU4 series of audio controllers from
iKON AVS.
Ikon AVS
Reliability through quality & simplicity
Introduction
The Synergy AU4 series are a 4 input to 1 output stereo audio router
and volume control. They also features a microphone input that is
mixed with the program audio
The AU4L has a line level output whilst the AU4P is fitted with a 10W
stereo class D amplifier.
Supplied Parts
The AU4L is supplied complete with:-
The AU4L itself.


12V plug top power supply

Instruction manual.
The AU4P is supplied complete with:-
The AU4P itself.

12V switched mode power supply.

1

Mains power cable
.

Instruction manual.
Please either retain packaging for future use or dispose of via
recycling. All packaging is recyclable.
1
The mains power cable / power supply will be country specific and
may be supplied external to the main amplifier packaging.
Ikon AVS
Reliability through quality & simplicity
1
.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SYNERGY AU4 and is the answer not in the manual?

Questions and answers

Summary of Contents for iKON AVS SYNERGY AU4

  • Page 1 Introduction The Synergy AU4 series are a 4 input to 1 output stereo audio router and volume control. They also features a microphone input that is mixed with the program audio The AU4L has a line level output whilst the AU4P is fitted with a 10W stereo class D amplifier.

  • Page 2: Connecting Audio

    The use of crimp ferrules is recommended. Ikon AVS Reliability through quality & simplicity Ikon AVS Reliability through quality & simplicity...

  • Page 3: Connecting Dc Power

    DC input socket. Power can be fed to a Synergy or SPC control panel via the screw terminals if required. Connection to a SPC Controller When used with the SPC controllers the synergy AU4 is inserted into the RS232 TX line between the SPC and the display as follows:- Connecting - Remote...

  • Page 4: Rear Panel Dip Switch Settings

    –15dBU use ‘retain last level’. If using the full range of microphone input from an external microphone mixer control set to 0dBu as this will ensure that there is also audio (e.g. the iKON AVS iCS-FM2 module). when powered.] Switch 3...
  • Page 5 Operation of the AU4 requires the same configuration that is loaded into the SPVC panel loading into the AU4 via the RS232 port.. Once The following RS232 protocol allows the Synergy AU4 range of audio loaded operation of the AU4 is transparent and required no additional controllers to be operated by a third party RS232 controller.

  • Page 6: Typical Application

    Followed by the command This will increase the volume of Input 2 by 1 step Send the command ’VU’ repeatedly to increase the volume by further steps. Ikon AVS Reliability through quality & simplicity Ikon AVS Reliability through quality & simplicity...

  • Page 7: Technical Specification

    Under the Waste Electrical & Electronic Equipment (WEEE) Directive Mic Equalisation: & Regulations, when customers buy new electronic equipment from +/- 14dB @ 10KHz Ikon AVS they are entitled to:- +/- 14dB @ 100Hz Input Impedance: Send old equipment back for recycling on a one-for-one, Mic input: >2K ohms...

  • Page 8: Warranty

    The iKON AVS products are manufactured in England by Nebula stages of manufacture and product design is kept as simple as Audio Ltd.

Table of Contents