Casio 3795 Operation Manual

MA0605-EA
About This Manual
General Guide
• Press B to change from mode to mode.
Timekeeping Mode
Timekeeping
PM indicator
Hour : Minutes Seconds
To set the digital time
3. When the setting you want to change is flashing, use B to change it as described
below.
Screen To do this:
Reset the seconds to
Change the hour or minutes
Toggle between 12-hour (
timekeeping
4. Press C to exit the setting screen.
Setting the Analog Time
Perform the procedure below when the time indicated by the analog hands does not
match the time of the digital display.
To adjust the analog time
In any Mode, press A to advance the analog time setting by 20 seconds.
• Holding down A advances the analog time setting at high speed.
Calendar
Month
Day
Day of the week
Operation Guide 3795
• Depending on the model of your watch, display text
appears either as dark figures on a light background or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.
• Button operations are indicated using the letters shown
in the illustration.
• Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the "Reference" section.
Calendar Mode
Press .
This watch features separate digital and analog
timekeeping. The procedures for setting the digital time
and analog time are different.
Setting the Digital Time
Use the Timekeeping Mode to set and view a digital
display of the current time. When setting the digital time,
you can also configure settings for the 12/24-hour format.
1. In the Timekeeping Mode, hold down C until the
seconds start to flash, which indicates the setting
screen.
2. Press C to move the flashing in the sequence shown
below to select the other settings.
Seconds Hour
(Exit the setting screen) 12/24-Hour format
Do this:
Press B.
) and 24-hour ( )
The watch's calendar normally makes allowances for
different month lengths. However, you will have to adjust
the date manually in the case of leap years.
• All of the operations in this section are performed in the
Calendar Mode, which you enter by pressing B.
Alarm Mode
Setting the Date
To set the date
3. When the setting you want to change is flashing, use B to change it as described
below.
Screen To do this:
Change the month
Change the day
Change the day of the week
4. Press C to exit the setting screen.
Minutes
Alarm
Alarm time
(Hour : Minutes)
Alarm Mode indicator
To set an alarm time
Hour
(Exit the setting screen)
Dual Time Mode Stopwatch Mode
1. In the Calendar Mode, hold down C until the month
start to flash, which indicates the setting screen.
2. Press C to move the flashing in the sequence shown
below to select the other settings.
Month
(Exit the setting screen) Day of the week
You can set the Daily Alarm. When the alarm is turned on,
the alarm tone sounds when the alarm time is reached.
You can turn on an Hourly Time Signal that causes the
watch to beep twice every hour on the hour.
• All of the operations in this section are performed in the
Alarm Mode, which you enter by pressing B.
1. In the Alarm Mode, hold down C until the hour setting
of the alarm time starts to flash, which indicates the
setting screen.
2. Press C to move the flashing in the sequence shown
below to select the other settings.
Left minutes digit Right minutes digit
Alarm/Hourly Time Signal setting
Day
Do this:
Press B.
1