Initial Set Up Instructions ULTRA Stand Assembly Instructions Fitting of External Skirt Note ULTRA Mosquito Catching Systems Mega-Catch Octenol Fragrance Strip NOTE...
Page 6
ULTRA Mega-Catch Variable Quantity Slow CO Gas Release System Gas Suppliers Connecting the ULTRA to the Gas Supply Operation of Variable Quantity Slow CO Gas Release System NOTE ULTRA NOTE Operation of the Programmable Timer Operation of the Programmable Timer Problem Solving...
Page 7
What Your Mega-Catch Mosquito Trap Will Do NOTE NOTE Installing and Siting the Mega-Catch Mosquito Trap Installation of Trap: Initial Set Up Instructions Mega-Catch Trolley...
Page 8
FIG 1 - Trap Positioning Siting of Trap:...
Page 12
Mega-Catch Variable Quantity Slow CO Gas Release System ULTRA ULTRA ATTENTION: DO NOT OPERATE THE ULTRA TRAP INDOORS...
Page 13
Connecting the ULTRA to the CO2 Gas Supply FIG 3.2 -Connection of trap to CO2 gas cylinder ULTRA Note Gas Suppliers ATTENTION: Do not turn on the CO gas supply from the Gas Cylinder until you have fitted the low-pressure Gas Regulator. Direct contact with liquid CO may result in injury.
Page 14
Supplier Note ATTENTION: BEFORE INSTALLING OR REMOVING THE GAS REGULATOR ALWAYS ENSURE THE GAS IS TURNED OFF BY TURNING THE ON/OFF WHEEL ON THE GAS CYLINDER CLOCKWISE. Operation of Variable Quantity Slow CO Gas Release System ULTRA...
Page 15
Gas Select # Approximate Duration Gas Suppliers ULTRA...
Page 16
Operation of the Programmable Timer NOTE How to Program: Mega Catch 12:33 RESET RECALL FIG 4.1 Mega Catch _ _ _ _ RESET RECALL FIG 4.2...
Page 17
Mega Catch _ _ _ _ RESET RECALL FIG 4.3 Mega Catch _ _ _ _ RESET RECALL FIG 4.4 Mega Catch _ _ _ _ RESET RECALL FIG 4.5 Mega Catch 12:33 RESET RECALL FIG 4.6...
Page 18
Mosquito Catching Systems Using the Liquid Catch Container (Attention: High-Speed Fan inside the Trap may cause injury if the power is not disconnected.)
Page 19
Using the Catch Bag (Attention: High- Speed Fan inside the Trap may cause injury if the power is not disconnected.) FIG 5 - Fitting of Catch Bag...
Page 21
NOTE Care of Your Trap (Attention: High-Speed Fan inside the Trap may cause injury if the power is not disconnected.)
Page 22
FIG 7 - Removal of Fan Safety Guard to remove Maintenance and Repair of Your Trap Replacement of U.V. Blub Maintenance and Repair of Your Trap...
Page 23
Mega-Catch Octenol Fragrance Strip To install or replace the Octenol Fragrance Strip: Wash your hands after this procedure has been completed. FIG. 8 Placement Position for Mega-Catch Octenol Fragrance Strip NOTE ATTENTION: Keep Mega-Catch Octenol Fragrance Strips out of reach of children. Read directions and Important Safety Instructions carefully before use.
Page 25
Maintenance and Repair of Your Trap Opening the Trap (refer to figure 9.1): ATTENTION: Always disconnect the power to your Mega-Catch Mosquito Trap before opening the Trap. NOTE...
Page 26
FIG. 9.1 Opening the ULTRA Trap FIG. 9.2 Replacement of U.V. bulb...
Page 27
Replacement of U.V. Bulb (refer to figure 9.2): Reinstallation of Plates: Connection of Wires: Removal of Timer Re-assembly of Trap: NOTE...
Page 28
Removal of Timer To Remove the Timer Unit (refer to figure 9.3): FIG. 9.3 Removal of Timer Unit Disposal of Timer...
Frequently Asked Questions 1. Will my Mega-Catch Mosquito Trap permanently eliminate mosquitos in the area? 2. How often do I need to operate my Mega-Catch Mosquito Trap? 3. Is the Mega-Catch Mosquito Trap harmful to me or my pets? ULTRA 4.
Page 30
Problem Solving NOTE Need Help? Specifications...
Need help?
Do you have a question about the MCU800 and is the answer not in the manual?
Questions and answers