Advertisement
Quick Links
● We greatly appreciate your confidence choosing our TAKEX CCD Video Camera.
● Please read this manual carefully before use and manage the camera properly.
Keep this manual at hand and reread it whenever you are uncertain about the operation.
Precautions for use
・
Use the equipment with a voltage within the range of specifications(12VDC
・
Do not use the equipment in an environment subject to water damage as TMC-734D is a indoor
type camera. Always use a protecting case like outdoor camera housing when in outdoor use.
・
Do not make an impact on the equipment.
・
Do not disassemble this equipment or alter the internal circuits. We assume no responsibility
whatsoever for any incidental damages resulting from the user's use of this equipment or
performance failure.
・
Be careful not to get the light receiving surface be exposed to high intensity light over a long
periods of time. If a right receiving surface is exposed to high intensity light over a long time
(regardless of the on/off state of the camera), the image pickup device may get discolored or get
burnt in.
・
When the camera is used under a fluorescent lamp or a mercury lamp, it may cause a perceptible
flicker or a periodic chromatic color change. However it is not the camera-related failure.
・Do not use the equipment in an environment subject to intense electromagnetic field.
In such an environment, malfunction of the camera, disturbance of image and noise are caused
by the field.
・
Do not directly input power to VIDEO OUT terminal, it causes the equipment to malfunction.
・
Do not make a wire connection with a wet hand. It creates a shock hazard.
・
When an abnormal or failure condition is detected, immediately stop using this equipment, cut off
the power supply, remove the external connection cables and contact the dealer for
inspection/repair.
Component parts
Please be sure to check the following items before use.
Camera component
Lens cap
Digital CCD Color Camera
Instruction Manual
Camera
TMC-734D
±
Hex wrench
DC plug
Iris connector
10%).
1
Advertisement
Summary of Contents for Takex TMC-734D
- Page 1 Use the equipment with a voltage within the range of specifications(12VDC 10%). ・ Do not use the equipment in an environment subject to water damage as TMC-734D is a indoor type camera. Always use a protecting case like outdoor camera housing when in outdoor use. ・...
- Page 2 Part names, Functions and Dimensions（Unit：mm）： ① ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ② ⑩ ⑪ ⑫ （全面） （側面） （背面） ①CCD glass surface ②Lens mount (CS mount) ③Hex-head screw for focusing ④AUTO IRIS ⑤IRIS level adjust knob ⑥Tripod socket hole ⑦VIDEO OUT ⑧Y/C output terminal ⑨W.B adjust button(R)
- Page 3 ④ ‥‥‥ AUTO IRIS Terminal to plug in the connector for AUTO IRIS lens ・ It delivers power and control signal when using AUTO IRIS lens.(Automatic recognition of VIDEO/DC iris lens) ⑤ ‥‥‥ IRIS level adjust knob It sets the aperture when using DC auto iris lens. ⑥...
- Page 4 Indication White balance operation mode Auto tracking mode To automatically correct the W/B working with the changing color temperature of luminous AUTO surroundings of the object. Manual mode M.W.B To manually adjust the W/B in conjunction with the W.B adjust button(R),(B).(⑨⑪) Lock in mode To lock in the color temperature set at MWB or PWB in order to prevent operational error.
- Page 5 ⑭ ‥‥ SHUTTER SW‥ Electronic shutter speed selector switch (Factory default: OFF) Number Mode Shutter speed (sec) 1 / 60 1 / 100 1 / 250 1 / 500 1 / 1000 1 / 2000 1 / 4000 1 / 10000 EI OFF 1 / 60～1 / 10000 EI FL...
-
Page 6: Operation Procedure
・When using C mount lens, use our C mount adaptor (CR-5,option) together. ・Please check the lens specification again when the lens do not fit in the lens mount well. 2) Connect the iris control cable of the camera to ④AUTO IRIS connector of TMC-734D when using an auto iris lens. - Page 7 Turn on TMC-734D, monitor and connected device etc.. ● Immediately turn off all the equipments and recheck the connection if nothing appears on a monitor screen. Adjust the aperture and the focus of the lens while watching the screen image of the monitor..
- Page 8 ⑬ Turn the Backlight correction function ON with -3 BLC on/off switch as needed. Cautionary notes about Back light correction function ・Back light correction is the function to reduce so-called “blocked up shadows” which may occur in underexposure condition. ・There are three ways of Backlight correction as follows according to ⑭Shutter switch setting. Setting Way of making Back light correction To make a Backlight correction with a combination of Shutter switch adjustment and AGC operation.
-
Page 9: Specifications
Specifications Model name TMC-734D (NTSC) 1/3“ interline transfer CCD image sensor Image sensor Total pixels 811（H）× 508（V） Effective pixels 768（H）× 494（V） 6.35μm（Ｈ）×7.4μm(Ｖ) Pixel size Sync system Internal sync Scanning system 2:1 interlace 1Vp－p 75Ω unbalanced Signal out Y/C out (Y:VIDEO SYNC、C:Croma Burst) Horizontal resolution 540TV lines or more（in the central part of the screen, Y/C）... - Page 10 If there is nothing wrong with above items, there could be a possibility of camera failure or ● inherent product defects. In such case, immediately stop using this equipment and contact the dealer for inspection/repair. TAKENAKA SYSTEM CO.,LTD. 86-66 Nomizo-cho Otsuka Yamashina-ku 607-8135 Kyoto JAPAN TEL:+81-75-593-9300 FAX +81-75-593-9790 E-mail:sales@takex-system.co.jp URL://www.takex-system.co.jp...