Advertisement
Quick Links
Advertisement
Summary of Contents for Breva Sonic Machinery S720 MIDI switcher
- Page 1 SONIC MACHINERY USER MANUAL...
- Page 2 S720 can be used in its “free format”, fixed on the floor with a VELCRO or with an optional panel RP2 RACKMOUNT, mounted on rack 19”. RP2 can sustain one or two S720 or other devices produced by BREVA SONIC MACHINERY having the same size (LS42).
- Page 3 Programming When turned on, S720 performs the starting test showing in sequence the 5 switches visualization leds Differently coloured according to the following three modes: STATIC - RED MOMENTARY A - GREEN MOMENTARY B - YELLOW After 7 seconds the devices will set on SWITCHER mode, on preset “00”, showing the chosen mode or the selection. MODE SETTING 1) Push EDIT button, the five leds will flash rapidly.
- Page 4 MOMENTARY MODE “A” and “B” MOMENTARY MODE “A” This mode (green led) reproduces the behaviour of a push button, that is the behaviour of a contact which closes for a second and then reopens. A typical example is the control of a head amplifier with CLEAN/CRUNCH/LEAD having the pedal composed by three buttons, with annexed digital logic, working in exclusion (only a channel is active, pushing another button it is possible to exclude the previous one etc.).
- Page 5 SWITCHES CONNECTION Each one of the 5 switches consist of exchange contacts switches; in this way, 2 contacts are available for each switch: normally open (NO) and normally closed (NC). In order to reach the two contacts (NO and NC) it is necessary to use an external jack which ands in two mono jacks, as represented in the following pictures.
-
Page 6: Midi Setup
MIDI Setup The programming of the MIDI SETUP is simple and intuitive. Pressing the button MIDI CH, he activates the way MIDI SETUP : the green leds flash. Pressing the button OMNI, all the leds flash and S720 receives on all the 16 MIDI channels. Still pressing on OMNI, S720 returns the normal formality (1 ...16). -
Page 7: Power Supply
POWER SUPPLY S720 power can be supplied through the 2,5mm coaxial plug placed on the back panel or through a DIN 7 poles connector (with the MC7 cable, optional). To obtain a correct functioning, S720 needs a continue 9V power and a current of at least 500mA. It is possible to use the phantom connection also to supply other S720 in cascade, a MIDI pedal, or other device working with the same voltage: the only limit is the entity of the required current (mA). - Page 8 BREVA SONIC MACHINERY via Nino Bixio 2 21040 VEDANO OLONA (VA) MADE IN ITAL Y www.breva.it info@breva.it...