Function Specifications - Acer LCD-X193HQ Service Manual

Acer
Acer –LCD-X193HQ
Items
Input impedance
Frequency response range
Signal to noise ratio
Output power

5. Function Specifications

All the tests to verify specifications in this section shall be performed under the following standard conditions
unless otherwise noted. The standard conditions are:
Temperature
Warm-up time
Checking display modes
5.1 Panel general specifications
5.1.1 General specifications
Supplier
Model name
Display Area
Pixel Pitch
Display Colors:
Number of Pixel
Pixel Arrangement
Brightness
Contrast Ratio
Viewing Angle
Display Mode
Frame rate
Response Time
Surface Treatment
Lamp
Outline Dimension
5.1.2 LCD module defects
LCD module defects check follow to the IIS.
5.2 Keypad Function
5.2.1
Control buttons on the front bezel
CONTROL KEY
[AUTO]
≧ ≧ ≧ ≧ 10K ohm
200Hz – 20kHz
≧ ≧ ≧ ≧ 40 dB
≧ ≧ ≧ ≧ 1.0 W + 1.0 W ( 10%THD )
: 25 ± 5°C
: 30 minutes minimum
: All the specified modes
AUO
M185XW01-V0
409.8 ( H ) x230.4 ( V ) , 18.5" diagonal
0.3(H) x 0.3(V)
16.7 Million (RGB 6-bit + HiFRC)
1366x768 pixels
RGB vertical stripe
2
300cd/m (Typ.) 250cd/m
1000:1 Typical
85° ° ° ° (L)/ 85° ° ° ° (R), 80° ° ° ° (U)/80° ° ° ° (D) typ. CR>=10)
Normally White
60Hz
Tr + Tf = 5ms Typical
Anti-glare, Haze = 25%,
Hard coating (3H)
2 CCFL
430.37(W)x254.6(H)x16.5(D) Typ
A. When OSD un-displays, press [AUTO] to perform auto-adjustment
B. When OSD displays, press [AUTO] to return to previous level menu
C. When "e Color OSD" OSD displays, press [AUTO] to exit the OSD
Specification
2
(Min.)
KEYS FUNCTION
9