Table of Contents
Advertisement
Advertisement
Table of Contents
Summary of Contents for yte COLOR TFT-LCD MONITOR
- Page 1 COLOR TFT-LCD MONITOR USER’S MANUAL YING TCHIN ELECTRONIC CO., LTD - 0 -...
-
Page 2: Table Of Contents
MANUAL CONTENTS： ─────────────────────────── A. INTRODUCTION: a. Product Description b. Package Contents c. Features d. Maintenance e. Precautions 3 ~ 4 B. CONTROL FUNCTION: a. OSD Button b. OSD Function 5 ~ 8 C. CONNECT DIRECTIONS: Connect Connecting D. SPECIFICATIONS: E. DISPLAY MODES: F. -
Page 3: Introduction
A. INTRODUCTION a. Product Description Congratulations on your purchasing this new generation of monitor. This LCD monitor may provide many superior functions, such as: high quality display, wide range frequency application, multi-adjusting as well as the advantages of radiation free, and electric power saving … etc. You will really get a whole new visional feeling of comfort, environment friendly and safety. -
Page 4: Maintenance
d. Maintenance 1. Gently wipe screen with a clean camel hair lens brush, or a soft, clean, lint-free cloth 2. Do not apply pressure to the screen surface when wiping it clean. 3. Do not use water or any chemical cleaners to wipe the surface of the screen or the LCD monitor. -
Page 5: Control Function
source is 220-240V AC supply, use the Tandem Blade type which attached with ground conductor power cord that meets the safety regulations. Do not overload wall outlets or power cords. Do not leave the power and extension cords in the place with high humidity and close to the high magnet influence. -
Page 6: Osd Function 5
b. OSD Function Pressing “MENU/ENTER (EXIT)”, the following picture will show up on the display. Main Menu ANALOG ： 1024 × 768 H﹒SYNC ： － 48.37 KHz V﹒SYNC ： － 60.01 KHz DISPLAY ADJUST COLOR ADJUST OSD ADJUST LANGUAGE SCREEN ADJUST EXIT Contents Explanation: Main Menu : Main items of the main menu. -
Page 7: Color Adjust
DISPLAY ADJUST ( For GAME OSD, please see the appendix II ) VGA OSD DISPLAY ADJUST H-POSITION V-POSITION CLOCK PHASE AUTO ADJUST RECALL RETURN H-POSITION : Move the screen image left or right. V-POSITION : Move the screen up and down. CLOCK : Adjust the size of horizontal image.(left and right sides) PHASE : Adjust the image distortion appearing as horizontal “... -
Page 8: Osd Adjust
Remarks 1.: While moving the light bar to the selected item, there will show a bar and value on the right. Next, press “ENTER”. The bar and value are shown yellow (or red). Then press 「 」 or 「 」 to adjust the value. ＋... -
Page 9: Connect Directions: Connect
SCREEN ADJUST SCREEN ADJUST BRIGHTNESS CONTRAST TEXT RECALL RETURN BRIGHTNESS : Adjust background black level of the screen image. CONTRAST : Adjust fore ground white level of the screen image. TEXT : RECALL : Return all adjustments to the original setting. RETURN : Back to the previous menu. -
Page 10: Connecting
b. Connecting Cable connection ： Power cable plug into the LCD AC input, and plug the male into the socket on the wall or extension cord you have. Adapter connection ： AC Connector plugs into the socket on the wall or extension cord you have. DC output connector plug into LCD DC input. -
Page 11: Specifications
D. SPECIFICATIONS Model Spec. LCD Display Active matrix TFT LCD Panel 1024×768 XGA/ 15”，1280×1024 SXGA/ 17”&19” Max. Resolution 1400×1050 SXGA/ 20.1” , 1680×1050 WSXGA/ 22” 1366×768 WXGA/ 26” & 32” & 37” & 42” □300：1 □350：1 □400：1 □500：1 Contrast Ratio □200cd/㎡... -
Page 12: Display Modes
E. DISPLAY MODES The setting value from the factory is as follows: LCD Size Model Resolution HFreq（kHz） VFreq（Hz） (4:3) or (5:4) 320X240 15.700 60.900 750X350 24.500 57.500 640X350 31.469 70.087 640X400 31.469 70.087 640X480 31.469 59.940 640X480 35.000 66.667 17” 640X480 37.861 72.809... -
Page 13: Service And Warranty
F. SERVICE & WARRANTY Service Please keep all the wrapping materials inside the package box in order to make sure the safety of transportation after purchased. Warranty not included: Damages caused by error operation. Do not follow up all instructions of bundle user’s manual. Taking apart of devices without authorized permission. -
Page 14: Appendix I : Signal Input Connector Board
APPENDIX I Signal Input Connector Board Input: 6 in or 10 pin connector for Input: America standard. 6 pin connector for 6 pin connector for Japan standard. Europe standard. COLORS SIGNAL(VR1、 VR2、VR3)：R、 G、B signal decline adjustment. Input: Output: 5 pin 15 pin D-Sub connector in common... - Page 15 Some of the old IC boards match up CRT monitors. Using the old IC board to match up LCD monitor is that may cause the signal voltage too high and make the display of LCD monitor to be too bright, obscure or distortion. Even LCD monitor cannot catch the signal and is unable to show the display.
- Page 16 None Noise (picture 1) Weak Noise (picture 2) Average Noise (picture 3) Strong Noise (picture 4) - 15 -...
-
Page 17: Appendix Ii : Game Osd Explanation 16~17
APPENDIX II : GAME OSD DISPLAY ADJUST SELECT GAME CHANNEL H-POSITION V-POSITION V SIZE H SIZE PHASE AUTO ADJUST RECALL RETURN SELECT GAME CHANNEL : Choose the default value of image signal. 1~200 sets. (expandable) H-POSITION : Move the screen image left or right. V-POSITION : Move the screen image down or up. - Page 18 Note : VERY IMPORTANT!! If you cannot find the signal in the appendix of signal of your IC board, LCD monitor also can be used. However, you have to choose SELECT GAME CHANNEL “0” to adjust the required items to make the display to be the best.
Need help?
Do you have a question about the COLOR TFT-LCD MONITOR and is the answer not in the manual?
Questions and answers