Advertisement
Opening Instructions
Disconnect the instrument from the mains.
Carefully turn the instrument over and unscrew the screws
marked with the arrows.
Hold the chassis (top & bottom) tightly and turn the istru-
ment the right way up, lift off the top chassis as shown by
side with care without forcing or disconnecting the cables.
K2
2 2 2 2 2
K2
K1
Keyboard Disassembling Instructions
TP10
Keyboard Separation
(open the instrument before proceed)
To separate the keyboard from chassis, carefully turn the
bottom chassis from horizontal to vertical, remove the
screws marked by
K1
, put it back horizontal, holding
top & bottom chassis move these tightly to the end of your
job table, now unscrew the screws marked with
to reassemble the keyboard & the chassis follow the instru-
ctions in reverse order.
K2
K1
Remove the key return spring.
Unlock the key appling not much strength
NOTE: To remove a sharp key before you must remove the near natural keys.
K2
K2
K2
K1
DRW
Boccato
DWG#
550184
PCB#
Opening Instructions
CKD
Riccobelli
DISK:
5
PRT:
1/1
Keyboard Disassembling Instructions
APP.
Pannelli
REV:
30/11/99
GENERALMUSIC S.p.A. ITALY
ALL RIGHTS ARE RESERVED, NO COPIES
OR REPRODUCE THIS DOCUMENT WITHOUT
WRITTEN CONSENT BY GENERALMUSIC.
Advertisement
