Directions For Use - DarbeeVision DVP-5000 User Manual

Directions for Setup
1. Plug one end of an HDMI cable into your video source and the other end into the DARBEE
connector marked HDMI In.
Common HDMI video sources are cable and satellite boxes, Blu-ray or DVD players, videogame
consoles, PCs, and smart phones.
2. Plug one end of another HDMI cable into the HDMI input of an HDMI display, and the other end
into the DARBEE connector marked HDMI Out.
Common HDMI displays are TVs, computer monitors, and projectors.
3. Plug the DARBEE power adapter into a 110 VAC wall outlet or power strip. Plug the 5 VDC end
into the jack on the DARBEE labeled 5V DC.
4. Turn on your TV and source device.
5. The red LED will light up to indicate that the DARBEE is receiving power. An internal green LED
will blink once per second to indicate that the DARBEE is working.
6. When video is present the DARBEE's blue LED will illuminate continuously.

Directions for Use

1. The DARBEE can show the image in four ways
a. DARBEE OFF
b. DARBEE ON
Push the DARBEE On/Off button on the remote or the DARBEE to toggle on and off.
c. DEMO Split Screen
d. DEMO Wipe Back and Forth
Push the DEMO button on the remote control to cycle through the Demo Modes. You
can also access these modes using the onscreen menu.
2. The DARBEE can show the image in three different viewing modes
a. HI DEF (for highest fidelity sources, cleanest image processing),
b. GAMING (for video games and CGI sources, adds more depth and detail),
c. FULL POP (adds the strongest depth cues for all sources, especially low-resolution or
low-quality sources).
3. Select a viewing mode and try using each of them with the content you are watching.
4. Choose a DARBEE Level. Upon first-time power up, the DARBEE will default to Full Pop mode at
a DARBEE level of 100. The overall range is 0 to 120. A level of 0 is bypass, meaning that the
input video is not modified, just the same as with DARBEE OFF. Adjust the level of processing to
whichever level is best for your TV and viewing conditions, according to your personal
preference.
5. Check the effect. Turn the DARBEE on and off, or use one of the Demo Modes to check the
difference between the original image and the DARBEE image. Try different viewing modes and
different DARBEE levels for the effect that pleases you the most. With different video sources,
you will probably want to change the DARBEE's settings. Happy viewing, and show your friends!
DarbeeVision User Guide 6 ©2014 DarbeeVision, Inc.