Cleaning And Care - Miele T 6251 Operating Instructions Manual

Cleaning and care

Before cleaning disconnect the machine from
the power supply by switching off at the isola-
tor or circuit breaker.
Disinfecting and cleaning agents often have
compounds containing chlorides in them. If
these agents dry onto the steel surfaces, the
residual chlorides will attack the steel and can
cause rusting. If you accidentally spill an
agent containing chloride on the machine it
should be rinsed off with water and dried with
a soft cloth.To protect your machine from rust
damage we recommend only using chloride
free disinfecting and cleaning agents. If you
are not sure about a particular agent contact
the manufacturer for advice.
Do not use a high pressure cleaner or
water jet to clean the machine.
Cleaning the fluff filter
Clean the fluff filter (5) at least once a day, de-
pending on the amount of fluff that has
collected and when the Clean fluff filter indica-
tor light comes on. Do not remove the fluff
filter and be very careful not to damage it.
The housing, control panel and any plastic
parts must only be cleaned using a mild clean-
ing agent or with a soft, damp cloth and then
dried.
Stainless steel housing should be cleaned
with a proprietary stainless steel cleaning
agent following the manufacturer's instructions
on the packaging.
Never use abrasive cleaning agents to
clean the machine.
If you are unsure about a particular product or
need further advice please contact
G3 Systems. See back page for address.
The following should be checked and if neces-
sary cleaned once a year by G3 Systems:
The whole interior of the tumble dryer
The fins on the ventilation fan
If appropriate maintenance is not carried out
regularly the efficient running of the machine
may be impaired and operational faults repre-
senting a fire hazard can occur.
14 «M.-Nr. 06 411 821 - GB - »