Summary of Contents for KID CAR Cocoon
- Page 2 Please take your time to familiarise against damage. You may wish to cover yourself with the KID CAR. It is no big the ground surface with a rug or a sheet deal to assemble the KID CAR, but it may of plastic fi...
- Page 3 Assembly of the back of the Cocoon The front cover is kept in place by an the axle holders. Push the locking pins The back of the KID CAR Cocoon is to be adjustable strap that holds the cover in the appropriate holes and secure the tightened using four adjustable straps.
- Page 4 fl oor. Pull the elastic cord around 2.2 The parking brake the studs on the plastic fl oor. Stand behind the KID CAR and use a toe cap to push the brake lever down into the 2 Daily use of the KID CAR parking position or move it up to go for a ride.
- Page 5 2.6 Detachable side windows Fold the spring clip of the locking pin The KID CAR Comfort has been fi tted up ward so the tongue is locked. Check with 2-in-1 rain and mosquito mesh whether the tongue is secured by moving side windows.
- Page 6 The KID CAR Company wearing approved safety helmets. Storage BV shall assume no liability for The KID CAR is 78 cm wide and will damage to third parties insofar such Front cover basically pass through every door. For damage is not in violation of civil...