Schematic Diagram - Amp Section - Sony PMC-DR50 Service Manual

5-13. SCHEMATIC DIAGRAM – AMP SECTION –
– 59 –
Note:
• All capacitors are in µF unless otherwise noted. pF: µµF
50 WV or less are not indicated except for electrolytics
and tantalums.
• All resistors are in Ω and
specified.
• 2 : nonflammable resistor.
Note: The components identified by mark ! or dotted
• U : B+ Line.
• Voltages are dc with respect to ground under no-signal
(detuned) conditions.
no mark : FM
• Voltages are taken with a VOM (Input impedance 10 MΩ).
Voltage variations may be noted due to normal produc-
tion tolerances.
• Signal path.
F
– 60 –
1 / W or less unless otherwise
4
line with mark ! are critical for safety.
Replace only with part number specified.
: FM
– 61 –
PMC-DR50