Advertisement
CheckMate
TM
III
RT-U43C
8
CheckMate
TM
III
Memorex
002 005 025 030 034 104 106 110
DVD Setup Codes
Mitsubishi
023 029 031 047 106
Denon
076
MTC
025 028 106
GE
077 078
Montgomery Ward 014 025 027 034 037 062
Hitachi
117
Multi Tech
025 028 042 106
JVC
079
NEC
004 005 007 044 070 071
KLH
118
Orion
022 049 065 066 067 068
LG
079
Panasonic
008 013 034 099
Magnavox
081 082
Pentax
046
Mitsubishi
083
Philco
008 034 036 106
Panasonic
084
Philips
008 017 034 036 106
Pioneer
085
Pioneer
004 045 046
Samsung
086
Portland
058
Sharp
119
ProScan
027 041
Sony
087
Quasar
013 034
Thomson
120
Quartz
005 009
Toshiba
088
RCA
001 008 016 017 027 028 037 041
Yamaha
089
046 106
Zenith
089
Realistic
005 014 025 030 034 106
Samsung
021 028 039 098 108 111
6. Programming Volume Control
Sansai
042
Sansui
004 093
When you first program your remote, volume and
Sanyo
005 024 114
mute are controlled through your TV.
Sayyo
030
To control volume / mute through your cable set-
Scott
003 006 031 042
top terminal...
Sears
002 005 015 030 046
Sharp
014 056
1. Press [CBL], then [SELECT] together - hold both
Shintom
042
down until the indicator light illuminates.
Signature 2000
014 025 027 037 062
Sony
032 035 050
2. Press [VOL
], then [CBL] for cable volume. The
Soundesign
106
indicator light will blink and go out.
Sylvania
008 016 017 025 034 036 047 054
To return volume control back to your TV, repeat step
065 073 074 106
1 above, then press [VOL
Symphonic
025 106
Tandy
005 025 106
7. Your Remote's Smartkeys
Tashiko
002
Tatung
007
Your remote has two (2) Smartkeys
Teac
007 025 106
Each Smartkey
TM
can be programmed so whenever
Technics
008
it s pressed, it can transmit up to 12 individual button
Teknika
002 053 106
presses in sequence.
Thomas
106
Programming and using the [CBL] Smartkey
TMK
091
Toshiba
006 015 046 052 096
The [CBL] button normally turns on / off your cable
Totevision
002 028
set-top terminal. You can also program this
Unitech
028
Smartkey™ so whenever it is pressed, it will turn on
Vector Research 031 044
your cable set-top terminal and TV, then tune the TV
Video Concepts 044 106
to a specific channel with one button press.
Wards
002 014 025 028 060 106
1. Press [CBL], then [SETTINGS] together - hold both
XR-1000
042
down together until the indicator light illuminates.
Yamaha
005 007 044 106
Zenith
004 018 035 038 061 106
RT-U43C
9
CheckMate
TM
III
RT-U43C
10
2. In this order, press [CBL], [TV], [0], [3].
The indicator light will blink and remain illuminated.
3. Press [CH
] to lock in this setting. The indicator
light will blink and go out.
To return the [CBL] button to its normal default setting,
repeat step 1, then press [CH
].
Programming and using the [TV] Smartkey
TM
The [TV] button normally turns on / off your TV.
You can also program this Smartkey
TM
so whenever it
is pressed, it will turn on your TV, then tune your TV to
channel 3 with one button press.
1. Press [TV], then [SETTINGS] together - hold both
down together until the indicator light illuminates.
2. In this order, press [TV], [0], [3]. The indicator light will
blink and remain illuminated.
3. Press [CH
] to lock in this setting. The indicator
light will blink and go out.
To return the [TV] button to its normal default setting,
repeat step 1, then press [CH
].
Note : When using any Smartkey
TM
to transmit a
series of button presses, be sure to keep your remote
aimed at the devices to ensure all functions are
received in their entirety.
8. Code Number Readback
], then [TV] in step 2.
To identify the 3-digit TV setup code stored under the
Point and Press
TM
method...
TM
1. Press [TV], then [SELECT] - hold both down until
TM
[CBL] and [TV].
the indicator light illuminates.
2. Press [INFO] to identify your TV setup code. The
indicator light will "blink back" the code numbers,
with a 1-second interval between each digit of the
TM
code.
Example : For code "035", the indicator light will blink
10 times, then 3 times, then 5 times.
To identify the 3-digit Cable setup code, press [CBL],
then [SELECT] in step 1 above, then press [INFO].
To identify the 3-digit VCR setup code, press [VCR],
then [SELECT] in step 1 above, then press [INFO].
CheckMate
TM
III
RT-U43C
11
9. Resetting Your Remote Control
To reset your remote control to its factory default
settings...
1. Press [CBL], then [SELECT]- hold both down
until the indicator light illuminates.
2. Press [SETTINGS], then [SETTINGS] again.
The indicator light will blink and go out.
10. Helpful Tips and Troubleshooting
1. Your remote is equipped with a Point and Press
TM
Programming label on the back of its case. This will
help you quickly program the remote without using
codes.
2. The indicator light will remain on while the remote is
in a programming mode. In the absence of an
entry, the light will go out after 45 seconds.
When locking in your devices, the indicator light will
blink and go out.
3. When using the Point and Press
TM
programming
method, you may find a code that turns your device
off but not back on. If this happens...
a. the correct code has not been found.
Continue pressing [CH
] until your devices
turn on and off.
OR
b. you may have gone past the correct matching
code. Try pressing [CH
] one step at a time
until you find a code that turns your cable set-top
terminal back on.
4. If you have any questions concerning the operation
of your cable set-top terminal, contact your cable
operator.
5. If the same button is pressed and held for 45
seconds, your remote control will turn itself off.
This extends the battery life by should the remote
become lodged under or between heavy objects,
for example sofa cushions.
REV. 7/2001
© 2001, CONTEC CORPORATION
12. Using Your RT-U43C Remote Control
Advertisement
