Advertisement
Quick Links
Advertisement
Summary of Contents for Acafa Technology HD4600T
- Page 1 4X6 HDMI Switch/Splitter Extender over CAT.5e/6 HD4600T User’s Manual Version 1.0...
- Page 2 1. Introduction Thanks for purchasing the 4 x 6 HDMI Switch/Splitter Extender over CAT.5e/6. Manual and retain it for reference in future if needed. Please read this 1.1 Features Supports 1 source selected among 4 HDMI sources and the same source content can be done splitting displaying on remote all of 6 displays and even distributing with extending through Ethernet switch 10/100.
-
Page 3: Specifications
2. Specifications 4 x 6 HDMI Switch/Splitter Extender (Transmitter) 1 x HDMI (Female) HDMI Output Console Connectors RS-232Control Port 4 x 3.5Ø jack HDMI source HDMI Input 4 x HDMI (Female) Extension Port RJ-45 Full HD 1080p Extension RJ-45 6 (Line Out) Audio Supports Stereo Audio Unidirectional 38KHz... - Page 4 3. Connection between Switch Extender (Transmitter) and Receiver Transmitter Receiver Choose one available RJ-45 port of the Extender Receiver (RX) connected with the Switch Extender (Transmitter) over CAT.5e or CAT.6 cable. Remarks: The Network Switch 10/100 enough could be transceiver for extending distance. Please refer to the following connections: (1).
- Page 5 4. IR Connection 5. RS-232 Connection Connect the RS-232 adapter cable to Switch Extender (Transmitter) RS-232 3.5mm jack, and another end of the cable is connected to the RS-232 port of PC. Connect the RS-232 adapter cable to Extender Receiver (RX)’s RS-232 3.5mm jack, and another end party’s device.
-
Page 6: Fcc Statement
Disclaimer Information in this document is subject to change without notice. The manufacturer does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other commercial damage, including but not limited to special, incidental, consequential, or other damages.