Safety Instructions - GRD Systems Bliss User Manual

Brightness / contrast and talking volume adjust
Upper part of the monitor right panel has three adjustments. Upper adjustment
changes image contrast of the monitor. Middle adjustment changes image brightness
of the monitor. Bottom adjustment changes talk volume.
Date and time settings
Press and hold button for 3 seconds in standby mode to enter date and time
settings menu:
1
Time and date
Time: 14 : 47
Date:2012\09\07
Shortly press or
button to move the marker between numbers. After all settings have been made,
press button to save and exit date and time settings menu.
Melody volume and ringtone settings
Press and hold button for 3 seconds in standby mode, melody will start ringing.
Shortly press button several times to adjust melody volume of the monitor or
press button to change current ringtone. 16 polyphonic ringtones are availble in
the monitor's memory. After all settings have been made, press
and exit into standby mode.
Same way you can change melody volume and ringtone while monitor calling.
Date and time screensaver
In standby mode shortly press any button on the keyboard exept
sceensaver with current date and time.
User's manual
5
button to change current number under the marker. Use
button to save
button, to view

Safety Instructions

1. Do not install near other electronic equipment such as computers, TV, video recorder as
this may cause radiated interference to the unit.
2. Do not disassemble the unit.
3. Do not spray water on the indoor unit. Do not keep the outdoor unit where it will be
exposed to extreme moisture.
4. Do not drop or shock the unit, dropping can result in failure to operate. Circuit boards can
crack and may not survive the impact.
5. Remove the power cord from the wall socket when unit is not used for long periods
6. Do not cover the ventilation holes with clothing, paper, curtains etc.
7. Keep minimum distance 5cm around the apparatus for su cient ventilation.
8. This apparatus is designed for middle climates. Do not use in high humidity, dusty or
dirty areas. The electronics may be contaminated.
9. To disconnect or isolate the unit, switch o at the socket or remove plug from wall socket.
Please ensure the plug and socket is easily accessible.
10. Do not use harsh chemicals, cleaning solvents or strong detergents. To clean, wipe with a
damp cloth from time to time.
Warranty
Warranty period is 12 months from purchaseing.
Warranty void if unit was damaged by the fault of the custumer.
Warranty void if the sticker on the backside of the unit was broken.
Life time of the unit depends on it's maintainance and carefull using.
6