38
6
ALIGNMENT.
Alignment Theorem and Procedure
6.1.1 Setup
a) Power on and enter factory mode to "Factory Reset" → "Reset All NVRAM Setting". (See picture 1~2)
b) Plug in test pattern or select "Factory Utility" in factory mode, activate "Burn In Mode". (See picture 3~4)
c) Warm up at least 1 hour.
Picture 1
Picture 2
Picture 3
Picture 4
Copyright © 2008 LG Electronics. Inc. All right reserved.
38
LGE Internal Use Only
Only for training and service purposes