Page 1
RLM-150 LCD Monitor Drawer User Manual Version 1.0 November 10, 2003...
Page 2
Trademarks RLM-150 is a registered trademark of ICP Electronics Inc. IBM PC is a registered trademark of International Business Machines Corporation. Intel is a registered trademark of Intel Corporation. Other product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies.
INTRODUCTION................4 ..................4 EATURES ..................4 HECKLIST SPECIFICATIONS ................5 USING RLM-150 ................7 OVERALL VIEW OF RLM-150............10 OSD CONTROL FOR LCD DISPLAY SETTINGS ........11 APPENDIX A USER MODE OSD STRUCTURE ......12 APPENDIX B USER MODE OSD ITEM DESCRIPTION ....13 APPENDIX C POWER ADAPTER SPECIFICATION .......14 APPENDIX D EXPLODE DRAW...........15...
Using RLM-150 Step 1. Unwrap the package and mount RLM-150 on the rack provided. RLM- 150 supplies the rear bolster to make rack mounting easier. For Rack mount Please switch the power off and unplug adapter before connecting or disconnecting to RLM-150 Step 2.
Page 8
Step 3. Plug the adapter into RLM-150 as shown in the following figure. Please be aware of static electricity when you establish each connection. Step 4. OPEN Monitor Drawer.
Page 9
Step 5. Multiple sliding Monitor function. Step 1 Step 2 Step 6. Turn on the computer. LEFT Button RETURN MENU ON/OFF POWER...
OSD Control for LCD Display Settings To change LCD display settings, use the OSD control buttons shown below and follow the instructions. LEFT Button RETURN MENU ON/OFF POWER Step 1. Using “Up” & “Down” buttons to move the selecting bar then press the “Select”...
Appendix A User Mode OSD Structure LEVEL 0 LEVEL 1 VALUE DISPLAY ADJUST H-Position 0-255 V-Position 0-30 CLOCK 0-1788 PHASE 0-31 AUTO YES , NO EXIT Press Menu Button INPUT SELECT ANALOG Press Menu Button DIGITAL Press Menu Button VIDEO COMPOSITE Press Menu Button VIDEO S-VIDEO Press Menu Button...
Appendix B User Mode OSD Item Description PHASE This function is used to adjust the sampling Phase. BRIGHTNESS-Z This option is available for adjusting the brightness of screen. You can adjust the offset value of ZURAC through this option. Setting this value too high or too low will destroy the quality of image.
Appendix C Power Adapter Specification Model no: UP0451E-12P67L Input requirements: Input Voltage range: 90 to 264 VAC. Line frequency: 47 to 63 HZ. In-Rush current: 40A max Output: Output Voltage range at +12V ±0.5V 3.75A 45 Watt Ripple and Noise: Voltage 120 mV Operating environmental conditions: Ambient Temperature: 0°C~40°C.