in4 care KI-8280 Instruction Manual

in4 care KI-8280 Instruction Manual

Non-contact infrared thermometer

Advertisement

INSTRUCTION MANUAL
Non-Contact Infrared Thermometer
Model : KI-8280

TABLE OF CONTENTS

Safety Instructions....................................1
Device Description and Intended Use.......3
About Body Temperature..........................4
Device and Display Overview....................4
Quick Start.............................................5
Explanation of Symbols............................6
Battery Installation....................................7
Setting......................................................8
Changing Modes/Setting.......................8
Setting °C or °F Scale..........................11
Memory Functions.............................11
Use.......................................................12
Taking a Measurement......................13
Cleaning................................................14
Care and Storage...................................14
Product Specification.............................15
Troubleshooting.....................................16
Warranty................................................17
SAFETY INSTRUCTIONS
WARNING
1. Read the entire instruction manual
before trying to operate the device.
2. The device is delivered non-sterile;
p l e a s e c l e a n t h e d e v i c e b e f o r e
measuring.
1
SAFETY INSTRUCTIONS
3. Stop using the device if malfunctions
appear or if it operates abnormally.
4. Children should not use the device
without the supervision of an adult.
5. Do not use the device when flammable
materials are around.
6. Do not place the device on scarred
tissue, open wounds or abrasions.
7. S o m e m e d i c a t i o n s m a y c a u s e a
rise in skin temperature which can
c o n s e q u e n t l y l e a d t o i n c o r r e c t
measurements..
8. Taking a measurement after skin has
been exposed to an extreme condition
such as direct exposure to sunlight,
fireplace/ heater or air conditioner flow,
may lead to incorrect readings.
9. If the device has been kept or stored
in extreme temperatures, wait at least
one hour for the device to return to
room temperature before measuring.
CAUTION
1. Do not scrape or scratch the Sensor
Lens as it will hamper the effectiveness
of the device.
2. Do not dismantle the device except
when replacing the batteries.
3. Wait at least thirty minutes after
exercising, bathing or eating before
taking a measurement.
4. If the subject's body temperature is
2
SAFETY INSTRUCTIONS
lower than the room temperature, a
false reading may occur.
5. To ensure the best performance of
the device, please follow the Product
Specification (on pg. 15) "Storage
Environment" regarding temperature
and humidity ranges for storing the
device.
6. Dispose of the device and batteries
according to your local regulatory or
environmental protection agency.
7. For maximal performance of the
device, we recommend a regular check
up and device calibration every two
years.
DEVICE DESCRIPTION
AND INTENDED USE
The non-contact infrared thermometer
is an electronic device designed to
absorb the infrared from human body to
detect your temperature. It is intended to
measure the human body temperature
for infants and adults without contact to
human body. It can be used by consumers
in household environment and doctor in
clinic as reference.
3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KI-8280 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for in4 care KI-8280

  • Page 1: Table Of Contents

    DEVICE DESCRIPTION room temperature before measuring. AND INTENDED USE SAFETY INSTRUCTIONS Model : KI-8280 CAUTION 1. Do not scrape or scratch the Sensor The non-contact infrared thermometer Lens as it will hamper the effectiveness is an electronic device designed to of the device.
  • Page 2: About Body Temperature

    ABOUT BODY DEVICE AND DISPLAY EXPLANATION OF BATTERY INSTALLATION TEMPERATURE OVERVIEW SYMBOLS Display Overview A person’s normal body temperature WARNING Waiting for Setting c a n r a n g e f r o m 3 5 . 5 ° C t o 3 7 . 8 ° F 1.
  • Page 3: Changing Modes/Setting

    SETTING SETTING SETTING SETTING Changing Modes/Settings Object temperature mode Memory/Mode Button to show on. 4. It increases 0.1°C (0.2°F) by pressing Press the POWER Button to confirm the offset manually. sound is on. 5. Press and release the Memory/Mode The device has four modes/settings: 1. This mode is intended to measure the Button to turn the offset off.
  • Page 4: Use

    SETTING PRODUCT SPECIFICATION Taking a Measurement 3. When finished viewing memory, you 9. The device will automatically power off Measurement Sites Forehead and Object Measurement may use the device as explained in #3 after 60 seconds of no use. 3 ~ 8cm Distance of Quick Start (pg.5).
  • Page 5: Troubleshooting

    TROUBLESHOOTING WARRANTY Warranty: T h e d e v i c e c o m e s w i t h a o n e y e a r The reading is over 43.3°C warranty if it is operated under normal (110°F).

Table of Contents

Save PDF