Table of Contents
Advertisement
Quick Links
Digital Terrestrial Receiver
Standard Definition
O O W W N N E E R R ' ' S S M M A A N N U U A A L L
Thanks for buying a
DIGITALL WORLD
to get the best performance from this Digital Receiver.
CAUTION:
Use of controls, adjustments or procedures other than
those specified herein, may void your warranty.
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the
user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may
be of sufficient magnitude to constitute an electric shock to a person
The exclamation point with an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
appliance (Digital Receiver)
This product has a serial number, Please record
the serial number and retain it for your records.
TFT-4000E
. Read this manual carefully
CAUTION : To reduce the risk of electrical shock, do not
remove the cover. No user serviceable parts inside.
Refer any servicing to qualified Service personnel.
WARNING : TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK
DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
Advertisement
Table of Contents
Summary of Contents for digitall world TFT-4000E
-
Page 1: Digital Terrestrial Receiver
TFT-4000E Digital Terrestrial Receiver Standard Definition O O W W N N E E R R ’ ’ S S M M A A N N U U A A L L Thanks for buying a . Read this manual carefully DIGITALL WORLD to get the best performance from this Digital Receiver. -
Page 2: Please Read This First
PLEASE READ THIS FIRST! Is Digital TV reception available in your home? Generally speaking; if this receiver was on display (demonstration) by your retailer and you live within the same area/town/city, then it should work within your home. If you experience break-up of picture or poor performance, it is recommended that you contact your local TV antenna installer first. - Page 3 How do I connect this box to my TV? Using the supplied cable, connect the plug (called RCA) onto the rear of the Set-top box labelled “Video-L Audio R” . The other end of the cable connect to your television’s Video in and Audio in. Any televisions that have mono sound (not stereo) will not require the red plug.
-
Page 4: Safety Instructions
Safety Instructions This STB has been manufactured to meet CE safety standards. Please read the following safety instructions carefully before you handle the STB. DEFINITION Throughout the manual, you will find the letters STB. This stands for Set-Top Box. MAIN SUPPLY AC 90 ~ 250V 50 / 60Hz 15W Max CABLE Use standard certified cables to prevent any malfunction of... - Page 5 E-mail Sales-all@digitallworld.com To provide you with the convenience of usage, DigitAll World has the right to make changes and improvements to the products including the user manual without any notice in advance. Copyright 2004 DigitAll World Co., Ltd. Throughout this manual the letters STB are constantly used. This stands for "Set-Top Box"...
-
Page 6: Table Of Contents
Understanding the Remote Control Unit ..........8 ~ 9 Connecting Your Equipment ..............10 Front Panel ......................10 Rear Panel .......................11 Connection ......................12 ~ 13 Setting Up Your System ................14 Menu Tree ......................14 Automatic Channel Search for Television Services........15 Manual Channel Search .................15 Basic Function ....................16 ~ 17 Menu Operation ...................18... - Page 7 Program Guide....................27 Now/Next EPG ....................27 WEEKLY EPG ....................28 Setup ........................29 Menu Language....................30 SCART Output....................30 Screen Type ....................31 Banner Time ....................31 Other Setting ....................31 ~ 34 Installation .......................35 Channel Search....................35 ~ 37 Change PIN Code ..................38 Parental Lock....................38 Receiver Lock....................39 Factory Reset ....................39 TELETEXT Navigation ..................40 Troubleshooting ..................41...
-
Page 8: Understanding The Remote Control Unit
Understanding the Remote Control Unit Remote Control Unit MUTE STANDBY NUMERIC BUTTONS TV/STB INFORMATION SUBTITLE PAGE UP/DOWN PRE-CHANNEL SOUND CHANNEL VOLUME UP/DOWN UP/DOWN EXIT MENU TV/RADIO TELETEXT FAV. SLEEP - 8 - TFT-4000E Digital Terrestrial Receiver... -
Page 9: Understanding The Remote Control Unit
To return to the normal viewing mode from SLEEP a menu. To select a presel time interval for automatic shut down. TELETEXT To navigate teletext pages. FAVORITE To move among the favorite lists. - 9 - TFT-4000E Digital Terrestrial Receiver... -
Page 10: Connecting Your Equipment
To move down highlight marked cursor. CHANNEL+ To change channels up. To move up highlight marked cursor. RED LED Stand by condition GREEN LED Operating IR SENSOR Point remote controller toward front on the TFT-4000E - 10 - TFT-4000E Digital Terrestrial Receiver... -
Page 11: Rear Panel
Used to connect a RF signal from the STB to either the RF input jack (antenna) on your VCR or to the antenna input of your TV. OPTICAL To connect S/PDIF cable for digital audio. RS-232 To connect to a personal computer for software upgrade. UPGRADE - 11 - TFT-4000E Digital Terrestrial Receiver... -
Page 12: Connection
(b) Connect STB via SCART to SCART connector (cable optional) Simply connect the SCART lead from TV (on STB) to the SCART connector(cable optional) usually found on the rear of your television. Select Component on menu for best performance. - 12 - TFT-4000E Digital Terrestrial Receiver... -
Page 13: Connection
(1) Connect antenna cable directly to set top box. Using another RF cable connect “Loop Through”to the antenna input on the VCR. (2) Connect another RF cable from VCR RF out to TV antenna input(Usually this connection was already made). - 13 - TFT-4000E Digital Terrestrial Receiver... -
Page 14: Setting Up Your System
Setting up Your System Menu Tree - 14 - TFT-4000E Digital Terrestrial Receiver... -
Page 15: Automatic Channel Search For Television Services
• Press GREEN (Manual) button and the STB will begin to search all channels you have chosen and save them into the channel list. - 15 - TFT-4000E Digital Terrestrial Receiver... -
Page 16: Basic Function
2. Press the OK button on the Remote Control Unit and select the channel you want from the Channel List. 3. Press the CH+/CH- buttons on the Remote Control Unit to select the channel you want. - 16 - TFT-4000E Digital Terrestrial Receiver... - Page 17 • Dolby digital AC3 may be available. When selected no sound may be heard on the TV. This feature in only avialable with fibre-optic cable from set top box to Dolby digital amplifier. Note : Broadcasters may/may not have Dolby audio availble - 17 - TFT-4000E Digital Terrestrial Receiver...
-
Page 18: Menu Operation
5. Press the MENU button to return to the previous menu or press the EXIT button to quit the Menu system completely. Note : Press the OK button when there is no Menu Window on the screen, and the simple channel list will appear on the screen. - 18 - TFT-4000E Digital Terrestrial Receiver... -
Page 19: Channel List
To watch a specific channel, first select the specific channel that you wish to watch by using the UP / DOWN / LEFT / RIGHT buttons, and then press OK button on the Remote Control Unit. Also use the PAGEUP/PAGEDN ( ) buttons. - 19 - TFT-4000E Digital Terrestrial Receiver... -
Page 20: Channel Information
Select the Yellow button in the Channel List menu, and the cursor toggles between channel and channel sorting menu. - 20 - TFT-4000E Digital Terrestrial Receiver... - Page 21 Furthermore, it displays the 4 types of channel lists that are arbitrarily set by the user (USER1, USER2, USER3 and USER4). Favorite : displays channel lists that are set as Favorite. Favorite function is sectioned into 4 categories from F1 to F4. - 21 - TFT-4000E Digital Terrestrial Receiver...
-
Page 22: Channel Editing
• Press the Blue button in the Channel List menu, and Channel Editing Window will be displayed. • Use the LEFT/RIGHT buttons to move the cursor, press the OK button to check the position you want, and then press the Menu button to exit and save the data. - 22 - TFT-4000E Digital Terrestrial Receiver... -
Page 23: Delete Channels
The Parental Lock on the Installation Menu must be switched ON so that the Channel Lock can work. When the Parental Lock is set OFF, even though the LOCK is set, anyone can watch the Parental Lock channel. - 23 - TFT-4000E Digital Terrestrial Receiver... -
Page 24: Edit Favorite Channels
• Press the OK button to save, and press the EXIT button to exit this menu. 4.Organize Channel Categories This mode sets categories according to the respective channels that enable you to search channels easily. - 24 - TFT-4000E Digital Terrestrial Receiver... -
Page 25: Move The Position Of Channels
• Press the OK button to save, and press the EXIT button to exit this menu. Note! : 1. The channel number of the channel should be changed. 2. This function is convenient when you want to move various channels simultaneously. - 25 - TFT-4000E Digital Terrestrial Receiver... -
Page 26: Rename Channels
• Use the LEFT/RIGHT buttons to move to the R(Rename) position and press the OK button. Keyboard screen will be displayed as bellow. Red button : Save & Exit Green button : Exit • Use the UP/DOWN/LEFT/RIGHT to key in the new channel name. - 26 - TFT-4000E Digital Terrestrial Receiver... -
Page 27: Program Guide
• After moving the cursor (pressing CH+/CH-); press the OK button to swicth to that service. Note : To see detailed information about the event you want, press the OK button on the appropriate event. The EPG Service may not be available depending on the broadcaster’s situation. - 27 - TFT-4000E Digital Terrestrial Receiver... -
Page 28: Weekly Epg
To see detailed information about the event you want, press the OK button on the appropriate event. Note 2. : The EPG Service may not be available depending on the broadcaster's situation. - 28 - TFT-4000E Digital Terrestrial Receiver... -
Page 29: Setup
1. Menu Language Select the desired language of the Menu. 13 languages are available. Choose the desired language from a selection. of English, Czech, Danish, Finnish, French, German, Hungarian, Italian, Portuguese, Swedish, Spanish, Turkish, Russian. - 29 - TFT-4000E Digital Terrestrial Receiver... -
Page 30: Scart Output
The Component selection(or sometimes called DVD input) may be available on some TVs. Simply connect a 3 colored lead from YPbPr to your TV component input. Be sure to select it on your TV remote controller. - 30 - TFT-4000E Digital Terrestrial Receiver... -
Page 31: Screen Type
(banner) box displayed on the Screen. The time ranges from 2 to approx 20 seconds. 5. Other Setting This mode helps you to setup Audio Language, Subtitle Language, Time Adjust, OSD Colour, OSD Transparency and System Information. - 31 - TFT-4000E Digital Terrestrial Receiver... - Page 32 Subtitle Language(DVB Bitmapped type Subtitles) Note : This is not closed-captions. Select the default language for subtitle when changing channels. Note : Subtitle languages are only available if the broadcast network is Transmitting extra languages. - 32 - TFT-4000E Digital Terrestrial Receiver...
- Page 33 You can set your local time by adjusting the differences from GMT, according to your location. GMT : Greenwich Meantime-central European time. OSD Colour You can adjust the OSD Colour : Cyber, Wood, Marine and Evergreen. Note : OSD = On Screen Graphical Displays. - 33 - TFT-4000E Digital Terrestrial Receiver...
- Page 34 Displays the system information: Model Name, S/W Version, H/W Version, B/L Version and Company Name. Note : If you contact DigitAll World Total Care Hotline, please have your serial number and details (as per above) ready before speaking with our telephone operator.
-
Page 35: Installation
C/R (Code rate) 1/2 2/3 3/4 4/5 5/6 7/8 These are special parameters for digital TV reception. The product will CONS(Constellation) QPSK 16-QAM, 64-QAM automatically set these for you G/I(Guard Interval) 1/32 1/16 1/8 1/4 - 35 - TFT-4000E Digital Terrestrial Receiver... - Page 36 The bar on the top of the screen shows the progressive status of the channel search. 3. The services found will be listed once auto search has finished. Simply press OK key to store. - 36 - TFT-4000E Digital Terrestrial Receiver...
- Page 37 When the Channel Search is completed, press OK button to save the result. Press the MENU button to return to the previous menu. Note : The Manual Channel Search may take a few minutes, depending upon how many CH(Networks) were ticked(tag),before press GREEN key. - 37 - TFT-4000E Digital Terrestrial Receiver...
-
Page 38: Change Pin Code
• Once the Parental is locked, whenever you watch the locked channel, you should enter the PIN code. Note! : When the Parental Lock is set OFF, you can watch the Lock Channel without entering the PIN Code. - 38 - TFT-4000E Digital Terrestrial Receiver... -
Page 39: Receiver Lock
• All data you are using will be deleted and the default data will be loaded. • If you select "OK", it asks your confirmation. • If you don’t want to reset, press MENU button or EXIT button to exit this menu. - 39 - TFT-4000E Digital Terrestrial Receiver... -
Page 40: Teletext Navigation
-double size of the upper half, only the upper half of the Teletext page is displayed. -double size of the lower half, only the lower half of the Teletext page is displayed. • Blue button : Toggle Mix mode(transparent background) - 40 - TFT-4000E Digital Terrestrial Receiver... -
Page 41: Troubleshooting
About On-Screen Error Message Adjust the direction of your antenna No or Bad Signal Check the “Signal Strength” and the “Signal Quality” in the channel list or channel search menu. - 41 - TFT-4000E Digital Terrestrial Receiver... -
Page 42: Technical Specifications
SDRAM for SYSTEM 8Mbyte SDRAM for GRAPHIC Power Supply Input Voltage : AC 90 ~ 250V 50/60Hz Type : SMPS Power Consumption : 15W MAX Standby Power : Max. 4W Protection : Separate internal fuse. - 42 - TFT-4000E Digital Terrestrial Receiver... -
Page 43: Technical Specifications
: 256 x 183 x 38 mm Weight (Net) : 0.9 Kg Operating Temp. : 0°C to +50°C Storage Temp. : -15°C to +65°C ✽ Feature & specification may change without prior notice. - 43 - TFT-4000E Digital Terrestrial Receiver... -
Page 44: Frequently Asked Questions
Unlike other electronic appliances in your house, the clock is set by the broadcaster and not DigitAll World's box. Therefore if the clock is still wrong, change to another television network to see the correct time. - Page 45 Q. What is the System Information menu on the digital receiver? A. The system information includes the software version (S/W), hardware version (H/W) and bootloader (B/L) version numbers. When you contact DigitAll World for support, please have these details ready.
- Page 46 TV to the video channel. The set top box picture will appear. Now it may be recorded. Q. Can I record the improved picture on my VCR? A. Refer to the above answer. - 46 - TFT-4000E Digital Terrestrial Receiver...
- Page 47 Memo - 47 - TFT-4000E Digital Terrestrial Receiver...
- Page 48 15100093 (REV.00; 2004.06.24)
Need help?
Do you have a question about the TFT-4000E and is the answer not in the manual?
Questions and answers