Dual-function usb wall charger power bank-5000mah (9 pages)
Summary of Contents for SIIG Portable Battery Charger-2400
Page 1
Portable Battery Charger - 2400 Quick Installation Guide Introduction The Portable Battery Charger - 2400 easily charges electronic devices while on the go, including iPhone /iPod / iPad ® ® ® mobile phones, PDAs, portable video games, MP3 players and more. Key Features and Benefits •...
Package Contents • Portable Battery Charger - 2400 • USB charging cable • 5 adapter tips for various mobile devices • Quick installation guide Layout LED Indicators Flashlight Power Button INPUT (Micro USB port) OUTPUT (USB Type A port) Figure 1: Portable Battery Charger - 2400 USB Type A plug Adapter tip connector Figure 2: USB Charging Cable...
Page 3
Adapter Tips Motorola/Blackberry/Mini USB Motorola/Blackberry/Micro USB Samsung Nokia Figure 3 Note: For updated list of compatible phone models visit www.siig.com...
LED Indicators The LEDs display the battery life/charging status of the Lithium-polymer battery. • 1 LED ~ 25% charge • 2 LEDs ~ 50% charge • 3 LEDs ~ 75% charge • 4 LEDs - Fully charged Checking the Charge Capacity of the Lithium-polymer Battery Press the power button to display the charge status of the Lithium-polymer battery.
Operating Instructions Charging the Lithium-polymer Battery using a Computer Connect the Micro USB adapter tip to the included USB charging cable then plug the Micro USB tip into the INPUT (Micro USB port) of the Portable Battery Charger - 2400, see Figure 4 below. Connect the USB Type A plug of the included USB charging cable to an available USB port of your desktop or notebook computer (make sure the...
Page 6
Charging the Lithium-polymer Battery using an AC Adapter Connect the Micro USB adapter tip to the included USB charging cable then plug the Micro USB tip into the INPUT (Micro USB port) of the Portable Battery Charger - 2400, see Figure 5 below. Connect the USB Type A plug of the included USB charging cable to any AC power adapter with a 5V USB Type A charging port, see Figure 5 below.
Page 7
Charging Portable Devices using the Included Adapter Tips When your portable device is out of battery, you can recharge it with the Portable Battery Charger - 2400 easily. Just make sure the Portable Battery Charger - 2400 is fully charged before proceeding. Connect the USB Type A plug of the included USB charging cable to the USB port OUTPUT (USB port) of the Portable Battery Charger - 2400.
Page 8
Charging Portable Devices using a USB Charging Cable When your portable device is out of battery, you can recharge it with the Portable Battery Charger - 2400 easily. Just make sure the Portable Battery Charger - 2400 is fully charged before proceeding. Connect the USB charging cable (supplied with the device) to your portable device.
Specifications • Battery type: Lithium-polymer • Output: 5V/1A • Input: 5V/1A • Battery capacity: 2400mAh • Operating temperature: -4 to 104 degrees F Warning • Do not use the charger in high temperature environments such as, direct sunlight, next to a fire or any other heat source.
RMA number posted on the outside of the shipping carton. • You are responsible for the cost of shipping to SIIG. Ship the product to the following address: SIIG, Inc. 6078 Stewart Avenue...
Page 12
Fremont, CA 94538-3152, USA Phone: 510-657-8688 Portable Battery Charger - 2400 is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. All other names used in this publication are for identification only and may be trademarks of their respective companies.
Need help?
Do you have a question about the Portable Battery Charger-2400 and is the answer not in the manual?
Questions and answers