Lanier LP222cn Operator's Manual page 327

Monitoring and Configuring the Printer
• Use the "primary" command to configure a primary WINS server IP ad-
dress.
• Use the "secondary" command to configure a secondary WINS server IP
address.
• Do not use "255.255.255.255" as the IP address.
❖ NBT (NetBIOS over TCP/IP) Scope ID Selection
You can specify the NBT scope ID.
msh> wins "interface_name" scope "scope ID"
• The scope ID can be entered using up to 31 alphanumeric characters.
• Be sure to specify the interface.
• ip1394 can be specified only when the IEEE 1394 interface is installed.
• wlan can be specified only when the IEEE 802.11b interface is installed.
Interface name
ether
ip1394
wlan
Interface configured
Ethernet interface
IEEE 1394 interface
IEEE 802.11b interface
208