Network Settings - Panasonic VIERA TC-L32E5X Owner's Manual

This is a setting for connecting to a broadband environment.
EXIT
OK
RETURN
■
Press to exit from
a menu screen
EXIT
■
Press to go back to
the previous screen
RETURN
Connection test
Check that the Network settings are as shown below, and then start "Connection test".
Select "Connection test" and press OK
(It takes a while to cancel the test.)
Displayed Connection test screen
Connection test
Check Ethernet cable connection
Validate IP address
Check for IP address duplication
Check connection to the Internet
Checking communications with server.
Test in progress...
Network connection
Select Network type (Ethernet cable/Wireless (WiFi))
Wireless network settings
■
Sets/Changes wireless network settings
Press "Wireless network settings" and display Wireless networks
Or select connection method (below) with color key.
Follow the directions on screen to complete the setting
Wireless networks
Network name (SSID) Wireless type
0024A5C1C1FE_A 11n(5GHz)
0024A5C1C1FE_A-1 11n(5GHz)
sssss 11n(5GHz)
001D73C528A0_G 11g(2.4GHz)
001D73D24884 11n(2.4GHz)
001D73D24884-2 11n(2.4GHz)
Select your wireless network.
Select OK
RETURN
WPS Push WPS PIN
* Wi-Fi Protected Setup is an easy setting of the Wi-Fi
Alliance's certification
●
For more details on setting of an Access point, please
refer to operating manual for the Access point.
38
Display the menu
Select "Network"
Menu Network
Connection test
Picture
Network connection
Wireless network settings
Audio
IP address/DNS settings
Network
Network link
Online Movies settings
Timer
Software update
New software notice
Lock
Network status
Setup
Select the settings and set
Menu Network
Connection test
Picture
Network connection
Wireless network settings
Audio
IP address/DNS settings
Network
Network link
Online Movies settings
Timer
Software update
New software notice
Lock
Network status
Setup
Status
Manual settings Search again

Network settings

Wireless (WiFi)
OK
On
Wireless (WiFi)
OK
On
Complete Connection test
Success-->Completion screen is displayed.
Error-->Follow the directions on screen to complete the setting.
If you perform the Proxy settings, check the Proxy address
and the Proxy port number.
WPS (Push button):
select
You can connect the Access point by pressing this button.
WPS (PIN):
OK
Set the PIN code that is displayed on the TV on the Access point.
Manual settings:
Manually set SSID, Security type, and Encryption type to
match the settings of the Access point to which to connect.
Search Again:
Search again an available wireless network within the range.
●
When connecting by 11n (5 GHz), select "AES" as the
Encryption type for the wireless LAN.
select
select
adjust