Advertisement
Quick Links
Model # 64-0500
Easy Assembly
Instructions & Rules
DO NOT RETURN TO STORE.
FOR ALL RETURNS AND WARRANTY
COVERAGE PLEASE CALL GLD
PRODUCTS:
1-800-225-7593
Featuring The
LEVELAL
™
Leveling System
Patent # 6,132,320
TM
Please provide model number, serial
number, and/or part number of the
product or part when you call.
Numbers can be found on outside
of packaging.
Advertisement
Summary of Contents for Fat Cat 64-0500
- Page 1 Model # 64-0500 Easy Assembly Instructions & Rules Please provide model number, serial DO NOT RETURN TO STORE. number, and/or part number of the FOR ALL RETURNS AND WARRANTY product or part when you call. COVERAGE PLEASE CALL GLD Numbers can be found on outside PRODUCTS: of packaging.
- Page 2 This manual is provided to instruct you during the assembly of your new Fat Cat™ Shot King Pool Table. Please refer to it as necessary. Be sure to have another person help you assemble the table. Careful handling of all parts during assembly will ensure many years of enjoyment! Fat Cat™...
- Page 3 Step 1: Assembling the Pedestals For each pedestal, locate the predrilled holes on interior surface of each leg post. Line up predrilled holes in (#26) support blocks and attach to leg posts with 2 (#2) Philips head screws. Repeat for all. Next, slide 1 (#21) leg panel into the precut slot into 1 (#22) A and 1 (#23) B leg posts.
- Page 4 Step 3: Attaching the Slate Support Beams Set (#32) end cross beams on top of side beams, lining up predrilled holes. Attach loosely with 8 (#8) hex bolts, 8 (#6) black washers, 8 (#10) washers, 8 (#11) spring washers, and 8 (#9) hex nuts. Repeat process for (#30) center cross beams.
- Page 5 Step 4: Securing the Slate With the help of another person, place the middle section of (#33) slate on the center supports of the base. Measure from the edge of slate to outer edge of end cross beams. Make sure this piece is centered perfectly, is square to all sides, and that the overhang is equal on both sides.
- Page 6 Step 5: Leveling the Slate Using the carpenter’s level determine which of the 3 sections is least level. Begin the leveling process with this section by adjusting the levelers with the (#47) Allen wrench. When it is level, set the other 2 sections to match it.
- Page 7 Move to the center of the opposite end of the table. With one hand, pull the cloth tightly toward you until you have a 1-1/2" fold in the center of the cloth and with the other hand press it firmly into place. Pull the sides of the cloth tightly toward their respective corners.
- Page 8 Press the cloth firmly against the slate along the curve of all pockets. Trim off excess cloth with scissors or box cutter. Locate the 18 holes for the rail bolts along the perimeter of the tabletop. Carefully punch holes in the cloth. Using a Philips screwdriver, run the shaft of the screwdriver around the sharp edge of the holes PRO TIP in the slate.
- Page 9 Step 8: Assembling Rails and Pockets Set all rail pieces into position on table top. Loosely attach (#38) side rail section to base on the underside of table with (#18) hex bolts and (#19) washers. Loosely attach (#39) end rails in same manner. Slide (#40) corner pieces on loosely.
- Page 10 Fat Cat ™ Shot King Pool Table Parts List #8 x 1-1/4" #8 x 1-1/2" 3/8" x 2-1/2" 3/8" x 1" Flat Head Screw Philips Head Screw Hex Bolt 3/8" Hex Nut Black Washer 24 Pieces 16 Pieces 8 Pieces...
- Page 11 Fat Cat ™ Shot King Pool Table Parts List (continued) #28. #29. #30. #31. #32. Leg Leveler Side Beam Center Cross Beam Wood Plug End Cross Beam 4 Pieces 2 Pieces 2 Pieces 4 Pieces 2 Pieces #33. #34. #35.
-
Page 12: Warranty Information
WARRANTY INFORMATION 1 Year Warranty on Shot King™ Pool Table Manufacturer warrants to the original retail purchaser, this product to be free from defects in material and workmanship for a period of one (1) year from the date of purchase. For ten (10) years from the date of purchase for slate, we will repair the playing surface of this table, free of charge, if it fails to remain flat, within a tolerance of ±30/1000 of an inch, measuring from any...