Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for POS POS-1L+
-
Page 1: User Manual
POS-1L+ POS-1L+ User Manual User manual V1.2 www.posbroadcast.com 1 of 10... -
Page 2: Table Of Contents
POS-1L+ Contents 1. General Description 2. Installation and use Description 2.1 Preparation 2.2 Use 2.3 Settings 3. External Description 3.1 Front Panel 3.2 Rear Panel 4. Technical Specifications 4.1 Physical specifications 4.2 Electrical specifications User manual V1.2 www.posbroadcast.com 2 of 10... -
Page 3: General Description
2.1 Preparation Unpack the POS-1L+ and before doing any other operation, be sure it has not been damaged during transport. In particular check that all the connectors are in perfect condition. -
Page 4: Settings
POS-1L+ 2.3 Settings POS-1L+ can be configuration via Internet Explorer. Before setup POS-1L+ please connect POS-1L+ and Computer on same Network. Power on POS-1L+ Open Internet Explorer and enter http:// and follow with IP Address of POS-1L+ on address • Enter Username and Password for access. Default Username: “admin” no password. - Page 5 POS-1L+ • Click on [ Login ] link and enter username / password Figure 2 Login • After enter, click on Login button if username / password are correct. Login button will go to disabled stage and Logout button will go to enabled as picture below.
- Page 6 POS-1L+ • Click on [ IP Configuration ] link page will show as picture below Figure 4 IP Configuration • Enter IP address and network parameter, after complete click on Change button, devices will save parameter and reboot please wait about 30 seconds.
- Page 7 Click on main link for go to main page and click [ FM Exciter Setup ] Figure 6 FM Exciter Setup • Enter parameter for Exciter and click on Set button, POS-1L+ will send setup parameter to Exciter and user can see result on [ Monitor Station ] Page User manual V1.2 www.posbroadcast.com...
- Page 8 Click on main link for go to main page and click [ FM Amplifier Setup ] Figure 7 FM Amplifier Setup • Enter parameter for Amplifier and click on Set button, POS-1L+ will send setup parameter to Amplifier and user can see result on [ Monitor Station ] Page •...
-
Page 9: External Description
POS-1L+ 3. External Description This chapter reports the elements of the front and rear panels of the POS-1L+ with a brief description of each of them. 3.1 Front Panel [1] AIR FLOW Grid for the intake of the air flow of the forced ventilation [2] POWER ON/OFF switch. -
Page 10: Technical Specifications
POS-1L+ 4. Technical Specifications 4.1 Physical specifications Panel size 483 mm (19”) x 44 mm (1 3/4”) (1U) Depth 240 mm (9 1/2”) Weight 1.5 Kg Working Temperature 0 °C - 50 °C 4.2 Electrical specifications ≅ 180 V - 240 V 50 – 60 Hz A.C.
Need help?
Do you have a question about the POS-1L+ and is the answer not in the manual?
Questions and answers