Download Print this page

CE Labs SW204HD Instruction Manual

4 x 2 matrix hdtv switch with digital audio
Hide thumbs Also See for SW204HD:

Advertisement

CE labs can support many areas of your audio and video
distribution needs.
We manufacture:
• Digital Signage software and Media Players
• HD Matrix Switchers
• RF amplifiers
• HDMI and Component HD distribution amplifiers
• CAT 5 Signal Extenders
• VGA Extenders and Splitters
• and cables of all types.
See our full product line at
www.celabs.net
WARRANTY
Cable Electronics, Inc. warrants this product to be free from defects in
material and workmanship, under normal use and service, for a period of
one year from the purchase by the original purchaser. If this product is
defective or malfunctions, Cable Electronics will replace or repair this unit
(at their option) within a reasonable time. No expressed or implied warranty
is made for any defects caused by immersion or exposure to liquids, abuse,
neglect, improper operation of unit, excess wear and tear and defects
resulting from unauthorized disassembly and or modification.
3209 Wood Drive
Garland, TX 75041
Phone: (469) 429-9200
Toll free: (800) 767-6189
Fax: (469) 429-9205
www.celabs.net
930_5058.01_REV_B_
Document: SW204HD_manual.pdf
SW204HD
4 x 2 Matrix HDTV Switch
with Digital Audio
• Allows you to connect 4 HD sources to either of the two
outputs without having to swap cables.
Full Matrix capabilities.
• Full metal cabinet has the weight to stay on the table
even with all the cables connected. Rack mountable.
• Front Panel, Network and IR Remote control.
• Learns IR commands, so you can use an existing IR remote
to control all switch commands.
• Network interfaces for remote PC control.
• High Bandwidth and low crosstalk provides maximum
picture performance.

Advertisement

loading
Need help?

Need help?

Do you have a question about the SW204HD and is the answer not in the manual?

Questions and answers

Summary of Contents for CE Labs SW204HD

  • Page 1 CE labs can support many areas of your audio and video distribution needs. We manufacture: • Digital Signage software and Media Players • HD Matrix Switchers SW204HD • RF amplifiers • HDMI and Component HD distribution amplifiers 4 x 2 Matrix HDTV Switch •...
  • Page 3 SW204HD as shown above. Component video cables are not supplied with the switch. On the front of the SW204HD, press the “POWER” button. Two of the channel LEDs will be on. When the power is off, no connections are made and the status will be grayed- out as below.
  • Page 4 1. Press and hold the power switch for 4 seconds. The power may be The lower part of the screen of the SW204 Controller shows the switch status in in the off or on position. The SW204HD will enter the learning mode a graphical format.
  • Page 5: Specifications

    Controlling and Monitoring the SW204HD SPECIFICATIONS Once connected, the SW204HD may be controlled using the Power, and Select Buttons. The current Power status of the SW204HD is shown next to the VIDEO Connect status. Nominal Input level: 1 Volt peak to peak...
  • Page 6: Getting Started

    Attach a RS232 cable or USB cable between the SW204HD and the computer. Set the switch on the back of the SW204HD unit to RS232 or USB to match the cable used. Insure the power adapter is connected to the SW204HD.