1. Manuals
  2. Brands
  3. Vox Technologies Manuals
  4. PCI Card
  5. IBD69
  6. User manual

Vox Technologies IBD69 User Manual

Micropci vga/lan card
Hide thumbs

Advertisement

Table of Contents

Enlarged version

Installing LAN Drivers for Windows 98

Follow these steps to install the Intel 82559 LAN/Ethernet driver for
Windows 95:
1. From the Control Panel, double-click the System icon.
2. Click the Device Manager tab.
3. Double-click Other Devices or Network Adapters in the list area.
4. Double-click a PCI Ethernet Controller.
5. Click the Driver tab, then click Update Driver.
6. Click Next at the Update Device Driver Wizard.
7. Select "Display a list of all the drivers..." and click Next.
8. Insert the Intel adapter disk and click Have Disk.
9. Enter the appropriate drive for your disk media (A:) and click OK.
10. Click OK at the Select Device dialog box.
11. The Update Wizard displays the message that it has found the driver.
Click Next.
12. Click Finish.
13. Restart your computer when prompted.
Page 12
IBD69 / IBD693
IBD99 / IBD993
MicroPCI VGA/LAN Card
User's Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IBD69 and is the answer not in the manual?

Questions and answers

Summary of Contents for Vox Technologies IBD69

  • Page 1 Installing LAN Drivers for Windows 98 Follow these steps to install the Intel 82559 LAN/Ethernet driver for Windows 95: IBD69 / IBD693 1. From the Control Panel, double-click the System icon. IBD99 / IBD993 2. Click the Device Manager tab.
  • Page 2 LAN DRIVERS INSTALLATION • IBD69/99 supports C&T 69000 (2MB embedded)/IBD693/993 supports 69030 (4MB embedded) VGA controller Making Floppy Disks for NetWare and Windows Installation • TFT LCD/DSTN LCD/CRT support • Resolution / Colors / Refresh Rate You need to use a floppy disk to install the LAN drivers. Use the MAKEDISK.BAT utility located in the \LAN\I8255X\MAKEDISK directory on the CD.

  • Page 3: Jumpers And Connectors

    The following section describes the normal display driver installation JP2: LCD Power Setting procedures for Windows 95/98. Use the following procedures when 3.3V Setting 5V Setting installing the display drivers for Windows 95/98. Click Start, then Settings, then Control Panel. Double click Display.
  • Page 4 Next. IBD99 / IBD993 7. Click Have Disk, insert the Configuration and Drivers disk * IBD69/IBD693 does not have the 82559 in the appropriate drive, and click OK. 8. At the Select Device dialog box, click OK again. Ethernet Controller integrated 9.
  • Page 5 Click the Start button, then go to Settings and click on Control MicroPCI Card Installation Panel. To insert the MicroPCI daughter cards, position it at Click on the Display icon to start the Display Properties window. 30° to the PCB and gently push it into the MicroPCI Click on the Settings tab, and then click on Display Type.
  • Page 6 Mono Mono Mono Color Color Color Color Color Color Color Color Color Signal Name Pin # Pin # Signal Name TFT TFT+HR STN-SS STN-SS STN-DD STN-DD Pin Name 8-bit 8-bit 16-bit 9/12/16 18/24 36-bit 18/24 8-bit 16-bit 8-bit 16-bit 24-bit G N D (4bP) (4bP)

This manual is also suitable for:

Ibd693Ibd99Ibd993

Table of Contents