Page 1
600TV Lines Super High Resolution Color Camera 3-AXIS INFRARED - LED PLASTIC DOME CAMERA Please read this manual thoroughly before use, and keep it handy for future reference. Design and specifications are subject to change without notice.
Page 2
WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT. CAUTION CAUTION CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK).
FCC COMPLIANCE STATEMENT FCC INFORMATION : THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT.
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4 . Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Page 5
INTRODUCTION The camera provides high-quality images using Sony CCD technology especially designed for closed-circuit television (CCTV) and security surveillance applications. Features: High resolution and high performance Sony Supe r HAD Technology Excellent picture quality 600 lines(Color) of resolution 0.1 lux(Color), 0 lux(B/W, IR LED ON) @ F1.2 50IRE Sensitivity Auto electronic shutter [1/60(1/50) ~ 1/100,000] and manual electronic shutter modes OSD (On Screen Display)
CAMERA CONNECTIONS 1. Lens : A/I Vari-focal lens for wide area monitoring. (D&N with ICR model option) 2. Power : 24V AC input / 12V DC input power source from a DC 12V or AC 24V ac +/-10% 60/50Hz +/-1Hz Use Certified/Listed Class 2 power source only.
CONTENTS of PACKAGE The package contains the following. Camera in Housing Instruction Manual (This Document) Accessory Kit for Installing Drilling guide label BASE INSTALLATION Make mounting holes and cable hole in the place (ceiling or wall) to which this dome camera is installed using the Drilling guide label. Dome body...
Page 8
To remove dome cover, turn the dome body counterclockwise until locators reach end of travel and pull off. Push the liner on the sides where the patterns are put in the teeth of a comb and pull it out. CEILING / WALL Drilling Guide Label Plastic anchor Screw Tapping (M6)
Page 9
- Video out check- Test Monitor Joystick Switch Board...
Page 10
STRUCTURE OF THE SETUP MENU <SETUP> LENS EXPOSURE WHITE BAL <LENS> <EXPOSURE> BACKLIGHT DAY NIGHT SHUTTER MANUAL BRIGHTNESS SPECIAL IMAGE ADJ DWDR RESET RETURN E XIT <WHITE BAL> <BACKLIGHT> <DAY NIGHT> ATW1 AUTO ATW2 COLOR AWC -> SET MANUAL <IMAGE ADJUST> <DPC>...
Page 11
LENS (Selection) This function is used to adjust the brightness of the screen. 1. When the SETUP menu is displayed on the screen, please position the arrow to point to 'LENS' by using the UP and DOWN buttons. 2. Please select the type of the lens you wish to use by pressing the LEFT or RIGHT button. MANUAL LENS LENS...
Page 12
WHITE BAL The screen color can be adjusted by using the WHITE BALANCE function. 1) ATW1 Set the color temperature 2500 K 10000 K 2) ATW2 Set the color temperature 2000 K 13000 K 3) AWC -> SET Please press the ENTER button white the camera is directed at a piece of white paper to obtain the optimum state under current illumination.
Page 13
DAY NIGHT The DAY/NIGHT menu is used to configure the day and night related setting for this camera. This camera can turn the IR(infrared)filter on or off. Mode : AUTO / COLOR / B/W / EXT (The EXT is not operating in this mode) <DAY NIGHT AUTO MODE>...
Page 15
3) PRIVACY AREA SELECT Select MASK area number.(Area 1 ~ Area 8) AREA STATE Select MASK ON/OFF HEIGHT Adjust height of MASK area WIDTH Adjust width of MASK area LEFT/RIGHT Adjust the location of the MASK area with boundary LEFT and RIGHT TOP/BOTTOM Adjust the location of the MASK area with boundary TOP and BOTTOM.
LENS ADJUSTMENT (OPTIONAL VARIFOCAL LENS) Field of view: Adjust setting from Tele (T) to Wide (W) field of View. Focus: Adjust lens focus from near (N) to infinity ( Adjust Focus Adjust Angular Field View DC AUTO IRIS LENS 4-9mm 2.8-12mm 9-22mm Image Size...
SPECIFICATIONS MODEL NTSC AC24V ± 10% / DC12V ± 10% Power source Power 410mA (5 Watts) - IR LED ON Power consumption 1/3" Sony Super HAD Image sensor Total pixels 795(H) x 595(V) 811(H) x 507(V) Scanning system 2:1 interlace Scanning frequency 15.734KHz(H) x 59.94Hz(V) 15.625KHz(H) x 50Hz(V)