1. Manuals
  2. Brands
  3. SunTech Manuals
  4. Air Conditioner
  5. FUSION plus
  6. User manual

SunTech FUSION plus User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
GB
FUSION plus
User manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FUSION plus and is the answer not in the manual?

Questions and answers

Summary of Contents for SunTech FUSION plus

  • Page 1 FUSION plus User manual...
  • Page 2 Construction Pic. 1 Pic. 2 Pic.3 Pic.4 Pic.5 Pic.6 Pic.7 Pic.8 IMPORTANT! Please don’t install or use your Portable air conditioner until you have read through this user manual carefully. Please retain this information for any product warranty and as a reference work on.

  • Page 3: Important Safeguards

    Pay special attention to the safety instructions. If you pass this FUSION PLUS unit on to a third party, you must also include these operating instructions. Please keep these operating instructions in a safe place for any questions which may arise in future.

  • Page 4: Part List

    Part list ① ② ⑨ ③ ④ ⑥ ⑩ ⑦ ⑤ ⑧ 1. Tope cover 9. Up filter frame 2. Air outlet grille 10. Protective net 3. Control panel 11. Down filter frame 4. Front cover 12. Water plug 5. Caster 13.

  • Page 5: Positioning The Air Conditioner

    Assembly of the exhaust hose, Picture 2 1) Screw the exhaust hose counterclockwise to the rear of the unit 2) Attach the exhaust hose taper at the end of the exhaust hose. Installation of the window kits, Picture 3 and 4 1.3.

  • Page 6: Remote Control

    1.2 ON/OFF POWER button: When press this button, model will enter cooling mode (Setting temperature 22°C high speed fan. Press again, unit will shut off and play shut- off music. 1.3 Mode button MODE： Press this key to choose Cooling, Heating (only for cool & heat model) Fan, or Dehumidifying Mode. Press the "Mode"...

  • Page 7: Troubleshooting

    1.3 Screw off the water plug and unplug the water blocker, water will come out to the water container. 2. Continue drainage: 2.1 Screw off the water plug and unplug the water blocker. 2.2 Use water pipe to connect the water outlet. Lead the pipe to the outside or washroom. Remark: 1.This method can be done only if there is no water in the water received plate.
  • Page 8 E1 on LCD Coil temperature is abnormal EVA: What is the COIL temperature? coil temperature instruct a technician or bring the unit back to the condenser&evaporator market, please keep the bill ready temperature,if the coil temperature is too hot or cold,then the PCB Will display E1 for the user’s remind.

  • Page 9: Ec Declaration Of Conformity

    EC-Declaration of Conformity The unit complies with the essential health and safety requirements of the European Union. The EC declaration of conformity is the basis for the CE marking of this unit. With the publication of this manual, all previous are not valid.

Table of Contents