1. Manuals
  2. Brands
  3. Originor Manuals
  4. Ice Maker
  5. HZB-12D
  6. User manual

Originor HZB-12D User Manual

With automatic ice-cube dispenser
Hide thumbs
Table of Contents

Advertisement

Quick Links

USER MANUAL
ICE MAKER
With automatic ice-cube dispenser
Model:HZB-12D

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HZB-12D and is the answer not in the manual?

Questions and answers

Summary of Contents for Originor HZB-12D

  • Page 1 USER MANUAL ICE MAKER With automatic ice-cube dispenser Model:HZB-12D...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS…………………………………………………2 PREPARING YOUR ICE MAKER FOR USE …………………………………………………………………….3 IMPORTANT SAFETY TIPS GETTING TO KNOW YOUR UNIT … … … … … … … … … … … … … … … … … … … …...
  • Page 3 IMPORTANT SAFETY INSTRUCTIONS Your safety and the safety of others are very important. We have provided many important safety messages manual and your appliance. Always read and obey all safety massages. This is the safety alert symbol: All safety messages will follow the safety alert symbol and the word “DANGER” or “WARNING”. DANGER WARNING These words mean:...

  • Page 4: Important Safety Instructions

    PREPARING YOUR ICE MAKER FOR USE IMPORTANT SAFETY TIPS When using electrical appliances, basic safety precautions should be followed to reduce the risk of fire, electric shock, and injury to persons or property. Read all instructions before using any appliance. Do not operate this，or any other appliance with a damaged cord.
  • Page 5 To avoid a hazard due to instability of the appliance, it must be placed at a even or flat surface.

  • Page 6: Getting To Know Your Unit

    GETTING TO KNOW YOUR UNIT 1. Water drip tray: 2. Cover of the water drip tray: Also used for the support of the ice-cube container 3. Water drain cap: For draining water from water reservoir. 4. Water drain port 5. Push button for ice-cube 6.

  • Page 7: Operating Procedures & Maintenance

    OPERATING PROCEDURES & MAINTENANCE UNPACKING YOUR ICE MAKER 1. Remove the exterior and interior packaging. Check that accessory is included first. If any parts are missing, please contact our customer service. 2. Remove all the tapes on the unit. Open the transparent window, take out the water filling funnel and the plastic soft tube(if supplied).

  • Page 8: Using Your Ice Maker

    USING YOUR ICE MAKER How to start the unit 1. Open the access door for filling water, pour water into water reservoir through the filling water funnel. Filling with potable water only. Keep water level below the “MAX” water level mark. Maximum Water Level 2.
  • Page 9 The blue light will light on when you push forward the push button, if this blue light is not on, the ice-cube will not fall down. How to drain out the water inside the unit 8. When you clean the unit or change the drinkable water, need to drain out the left water in the water reservoir, please disassemble the water drip tray first, then unplug the water drain cap, the water will flow out from the unit completely.

  • Page 10: Troubleshooting

    TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Stop the ice maker, fill water, and Add Water” indicator is Lack of Water. press “Power” button again to restart the unit. “Ice Full” indicator is on. There is too much ice. Remove ice from ice basket. Stop the ice maker, and restart it The ice cycle is too long.

  • Page 11: Circuit Diagram

    CIRCUIT DIAGRAM WATER ICE COMPRESSOR POWER VALVE MOTOR COMP AC-N ON/OFF AC-L MAIN CONTROL PCB PUMP For Ice-cube dispensing Disposal Information Note: Blowing gas inside the unit is flammable, disposal of these material shall be in accordance with national regulations.

Table of Contents