Beginning And Cancellation; Starting Up The Function And The Display; How To Start Test Mode; Settings For Start-Up Of Diagnostic Program - Yamaha RX-V795a Service Manual

RX-V795a/RDS/HTR-5170

2. BEGINNING AND CANCELLATION

(1) STARTING UP THE FUNCTION AND THE DISPLAY

There are two ways to start up. One is by using the front panel keys, another is by using the remote control transmitter.
After starting up, the menu No. 1 is displayed.
A. How to start test mode
There is a method of starting the self-diagnosis function.
Using the keys on the main unit:
Hold down the "INPUT MODE" and "FM/AM" keys simultaneously, and press the "STANDBY/ON" key; submenu
No. 1 of diagnosis main menu No. 1 will start.
B. Settings for start-up of diagnostic program
The settings used when starting the diagnostic program are as follows.
1.
EFFECT LEVEL
CHANNEL
LEVEL (dB)
2. MUTING
3.
INPUT (VIDEO)
4. CENTER SPEAKER
5. REAR SPEAKER
6.
MAIN SPEAKER
7. LFE/BASS OUT
C. Start-up display
The diagnostic menu list appears on the monitor screen and the information of the protection function appears on the
front panel display of the main unit.
On the FL display of the main unit, an opening message (or the history of the protection) appears for 2 seconds before
the diagnostic menu No.1 MAIN BYPASS.
9
:
CENTER R SUR. L SUR.
0 0 0
: OFF
: DVD/LD (DVD/LD)
: LARGE
: LARGE
: LARGE
: SWFR
MONITOR SCREEN
DIAGNOSTIC MENU
1.ANALOG THR
2.DSP THR
3.AC-3/DTS THR 9.AD DATA
4.PRO LOGIC
5.SPEAKERS
6.EFCT OFF/DISP
CHK SUM:XXXX
1. MAIN BYPASS
SWFR
0
7.MAN TST
8.PRESET
10.STATUS
11.VER/EX
X